1) Perform monitor reset on "Display Reset"

2) Auto Adjust via OSD (ON SCREEN DISPLAY)

3) Perform monitor self-test feature check to determine if scrambled screen appears in self-test mode

Self-Test Feature Check (STFC) allows users to check if the monitor works properly.  

• 1. Turn off both your computer and the monitor
• 2. Unplug the DMS cable from the back of the computer
• 3. Turn on the monitor
• 4. If the monitor is functioning properly, you will see a message similar to the illustration below
• This box appears during normal operation if the video cable becomes disconnected or damaged.
• 5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.  
• 6. If the power indicator remains amber after using the previous procedure, check your VGA card, cable, and computer system; your monitor is functioning properly.  

5) Boot up in the "safe mode"

If the problem persists please contact EVGA technical support at 888-881-3842.