OS:
All Windows Version
Driver Version:
1.08
Release Date:
3/31/2014
Driver File:
Download
BIOS 1.08 Updates
- Adds support for New 4th Generation Intel Core Processors
- Fix Intel i210 network cannot be detected after G3
Windows Installation
- Download the correct .zip file below for your motherboard:
152-HW-E878-KR - EVGA Z87 Classified
- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
- NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.
USB Flash/DOS Drive Installation
- Create a bootable disk.
- Extract the above .zip file to your bootable disk.
- From a DOS prompt, run update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, shut the system down completely. Then power on again.
After flashing verify that the correct flash was applied by checking the version number on the lower right corner of the BIOS screen.
Return to download center.