EVGA

Drivers and BIOS

OS: Windows 10 64bit

Driver Version: 1.21

Release Date: 1/10/2020

Driver File: Download

BIOS 1.21 Updates 

  • Adds "Above 4G" and "MSR Lock" items to the BIOS.
  • Updates Management Engine Firmware to 11.12.0.1622.

 


Windows Installation

  • Download the correct .zip file below for your motherboard:
         151-SX-E299-KR - EVGA X299 Dark
         142-SX-E297-KR - EVGA X299 FTW K
         121-SX-E296-KR - EVGA X299 Micro ATX 2
         131-SX-E295-KR - EVGA X299 Micro ATX
  • First go into your BIOS and load defaults, save and reboot to Windows.
  • Close all open programs.
  • Go into the folder where you unzipped this package and update.bat
  • Press Y to start the flash process
  • DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
  • After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
  • NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

  
BIOS Installation

  • Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
  • Reboot the machine and go into the system BIOS
  • From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
  • Select the .bin file you wish to flash.

Return to download center.