Ok no matter what I do, I cannot just get my ram to run at 1600. If i OC my i7 930 to 3.1ghz with a 2:10 split. When I return the CPU to its stock 2.8 GHz and just set the memory split to 2:12 with Standard profile (setting the right timings 8-8-8-24-88-1T DIMM 1.65v, VTT +100mV) I cannot get the ram to run at anything higher than 1066 MHz, regardless of me putting all the timings and voltages and setting the split manually.

Anyone have any suggestions on y this could be happening? If i try XMP and leave everything on auto same thing happens with the exception of my NB running at 3170MHz. Running 6gb of Corsair Dominators.

awsome >.<, well I guess I will run OCd for a bit and see how I like it, I didn't bump up the speed to 4ghz like most of u guys just yet. On a side note though, the timings were always right 8-8-8-24-88-1T, its just the multiplier would not change from 2:8 even though the bios is set to 2:12 :(

If you are seeing 800 in E-Leet, that is 1600, as your memory is DDR (Double Data rate).
 
Take your clock speed example 133, and multaply that by the 2nd digit in your mem multaplier example 2:12 would be 12X133.3 = 1599, but would show 1599/2 = 799 in E-leet you would also get 1600 with a 2:8 @ 200 clocks, or a 2:10 @ 160 clocks.

ebalsumgo

Ok no matter what I do, I cannot just get my ram to run at 1600. If i OC my i7 930 to 3.1ghz with a 2:10 split. When I return the CPU to its stock 2.8 GHz and just set the memory split to 2:12 with Standard profile (setting the right timings 8-8-8-24-88-1T DIMM 1.65v, VTT +100mV) I cannot get the ram to run at anything higher than 1066 MHz, regardless of me putting all the timings and voltages and setting the split manually.

Anyone have any suggestions on y this could be happening? If i try XMP and leave everything on auto same thing happens with the exception of my NB running at 3170MHz. Running 6gb of Corsair Dominators.

What motherboard are you running? The E758? If so you are not alone with this problem. Many many others have had the same problem as you. Freezing, Blue screens, Restarting by itself.

Board:EVGA E758-A1 3-Way
CPU: Intel Core i7-930 2.8GHz Model BX80601930
RAM:CORSAIR DOMINATOR 6GB (3 x 2GB) 1600 (PC3 12800) Model TR3X6G1600C8D
Cooler: ZALMAN CNPS9900ALED
Power: Thermaltake Toughpower W0133RU 1200W
GPU: 2xEVGA 512-P3-N871-AR GeForce 9800 GTX+ 512MB
HDD: 2xWestern Digital VelociRaptor WD1500HLFS 150GB 10000 RPM
Case:Thermaltake ArmorPlus(Armor+) VH6000BWS

Mother Board ( EVGA X58 Classified E-758 )                                                       
Bios ( 49 )                                                                                                     
 CPU ( 930 )                    
CPU Cooler ( Zalman 9900 )
Memory ( Corsair DominatorTR3X6G1600C8D 8 8 8 24 )
PSU ( Thermaltake 1200W )
GPU ( EVGA GeForce 9800 GTX+ X 2 )
Drivers ( 190.21 )                                                                                                  
Operating System ( Windows 7 64 Professional )


Frequency Control
CPU Clock Ratio ( 20X )                                                                                         
CPU Host Frequency (Mhz) ( 160 )                                                                      
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( Auto )                                                
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 ) 

Memory Feature        
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 2:10 )                                                                
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 8 )
tRCD Setting ( 8 )
tRP Setting ( 8 )
tRAS Setting ( 24 )
tRFC Setting ( 88 )
Command Rate ( 1T )


Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( Auto )                                                                                                
CPU VTT Voltage ( +100 )
CPU PLL VCore ( Auto )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( Auto )
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )
PWM Frequency     ( 800 Khz)

CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Enabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.8 GT/s )
OC Recovery ( Disabled )
Turbo Performance ( Disabled ) 

PnP/PCI     PCI Express
Maximum Payload Size ( 4096 )
 
Power Management Setup
ACPI Suspend Type ( S1&S3 )   
HPET Support ( Enabled )     
HPET Mode ( 64-bit )

With those settings I am able to get my ram I get CPU 3.2 GHz and RAM 1578 MHz, however I was trying to get CPU 2.8 and RAM 1600 and with BIOS 49 I am just flat out unable to.

as i said in the first post, when i say unable to i mean i am not able to run the ram at 1600 i am only able to run it at 1066, nothing more nothing less. the system itself is stable I just dont get the speed of my ram.