-
-
- Ability to run 3-way SLI in any chassis
- Onboard power and reset buttons, reset button shows HDD activity. Onboard and rear I/O panel CMOS clear button, reset the BIOS without opening the case
- Onboard debug LED that shows current CPU temp after boot
- 100% solid state capacitors allow for better overclocking and stability
- Supports up to 12 USB ports and 10 SATA II ports, one of which is also e-SATA
- Click for more information
-
-
- Next generation Intel™ Core i7 Support
- Intel™ X58/ICH10R Chipsets
- Supports over 6.4 Giga-transfers per second
- Supports Intel™ Turbo Mode Technology for free performance boosts
- Triple-channel memory bus delivers incredible bandwidth, up to 12gigs supported
- 3-way SLI optimized for the ultimate in 3D performance
- Click for more information
-
-
- EVGA E-LEET Tuning Utility gives you quick access to overclocking controls lets you control the BIOS in real-time
- EVGA EZ Voltage gives hardcore overclockers quick access to reading their voltage levels
- CPU PWM Optimized for over 430w continuous load
- Capable of running QPI frequencies of 200MHz and beyond
- Click for more information
-
-
- EVGA VDroop control stabilizes voltage, what you see in the BIOS is what you get in Windows
- Dummy-OC for easy overclocking
- Adjustable CPU PWM Frequency from 800KHz to 1,050KHz
-
Very flexible voltages
•CPU VCore up to 2.30v•DRAM Voltage from 0.7v to 3.075v•CPU VTT 1.1v to 1.875v•CPU PLL 1.0v to 2.575v•RAM VRef -> -640mv to +640mv•QPI PLL Voltage 1.1v to 1.875v•IOH VCore 1.1v to 1.875v•ICH/IOH I/O Voltage 1.5v to 2.275v•ICH VCore 1.05v to 1.825v - Click for more information
The onboard power and reset buttons allow you to easily turn on, off, and restart your system. These buttons feature LEDs that represent Hard Disk Drive activity and when the system is powered on. The board also has an onboard Clear CMOS button for quick and easy clearing of system settings. These features are perfect for table top benchmarking and overclocking situations.