EVGA

Drivers and BIOS

OS: Windows 10 64bit

Driver Version: 1.14

Release Date: 4/12/2019

Driver File: Download

BIOS 1.14 Updates 

  • Update CPU Microcode and add OC Support for future CPU
  • Update Intel RST to 17.2.6.1072 for Intel security issue
 

 

 
Windows Installation

  • Download the correct .zip file below for your motherboard:        

         134-KS-E379-KR - EVGA Z370 Classified K
         134-KS-E377-KR - EVGA Z370 FTW
         121-KS-E375-KR - EVGA Z370 Micro ATX

  • First go into your BIOS and load defaults, save and exit
  • Close all open programs.
  • Go into the folder where you unzipped this package and double-click update.bat
  • Press Y to start the flash process
  • DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
  • After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
  • NOTE: If the flash box immediately closes after flash attempt, the flash may need to be run from a CMD prompt with administrator privileges or DOS version.

  
BIOS Installation

  • Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
  • Reboot the machine and go into the system BIOS
  • From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
  • Select the .bin file you wish to flash.

Return to download center.