EVGA

FAQ ID # 58003
Last Update : 2010/07/21
Rating : Rated 3Rated 3Rated 3
Send FAQ by E-mail
Add to favorites
Print this FAQ

Social Bookmark this Article :


Question / Issue
My 630i board cycles between codes 88 and C1.

Answer / Solution

This is similar to the -- error code on the 680i, but may point more towards RAM issues. Clear the bios manually by removing the battery for 5 – 10 minutes. Cycle the ram in the primary dimm one by one, remount the cpu and remove all peripherals from the system. If the issue persists take the board out of the case and put it on the plastic clamshell and boot it outside of the case to ensure it is not an issue with a grounding or short circuit. If it persists, try a different psu or cpu if possible.



Direct Link to This FAQ
http://www.evga.com/support/faq/?f=58003

Tags
630i, 630, 88, C1, post, codes, code,
How would you rate this article?

Poor
1
2
3
4
5

Great
Submit

Back to Top