Drivers and BIOS

The following was updated in release P10:

• Improved CPU Compatibility.

INSTRUCTIONS: BIOS updating can be accomplished VIA one of the below methods:

• Download the following .iso file: NF79_P10.iso
• Use CD Burning software to burn the .iso image onto a blank CD (Nero, Alochol 120%, MagicISO etc.)
• After it has burned, insert CD and restart the machine, go into the BIOS and load defaults, save and exit.
• Now set the CD Drive as the primary boot device, or press escape while the system is booting to select CD as the bootable device.
• After flash remove the CD, and power off PC Completely.
• Turn on the PC and load defaults in BIOS

• Download the following executable: NF79_P10.exe
• Insert blank floppy disk into drive and run executable.
• Now set the Floppy as the primary boot device, or press escape while the system is booting to select USB Floppy as the bootable device.
• After flash remove the floppy, power off PC Completely.
• Turn on the PC and load defaults in BIOS.

• Download NF79P10.bin.
• Visit this thread and follow the installation instructions. (thanks RaffieKol).
• Use the downloaded .bin file in the USB flash drive.