Drivers and BIOS

BIOS 1.16 Updates 

• Update ME FW 11.8.82.3838 for Intel security vulnerability
• Add Resizable BAR and Above 4G support

Windows Installation

• Download the correct .zip file below for your motherboard:        

         134-KS-E379-KR - EVGA Z370 Classified K
         134-KS-E377-KR - EVGA Z370 FTW
         121-KS-E375-KR - EVGA Z370 Micro ATX

• First go into your BIOS and load defaults, save and exit
• Close all open programs.
• Go into the folder where you unzipped this package and double-click update.bat
• Press Y to start the flash process
• DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
• After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
• NOTE: If the flash box immediately closes after flash attempt, the flash may need to be run from a CMD prompt with administrator privileges or DOS version.

BIOS Installation

• Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
• Reboot the machine and go into the system BIOS
• From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
• Select the .bin file you wish to flash.