OS:
Windows 10 64bit
Driver Version:
1.23
Release Date:
4/17/2020
Driver File:
Download
BIOS 1.23 Updates
- Adds "PCIe SSD Card (Non-VROC)" option. (This can be used to set PCIe x16 slot to x4x4x4x4 without VROC feature)
- Supports Intel CPU Attached Storage for different VMD group devices.
- Adds additional i9-10920X CPU support.
- Resolves specific issues with CPU PerCore mapping.
- Adds "Always Show Boot Option" feature under Boot page.
Windows Installation
- Download the correct .zip file below for your motherboard:
151-SX-E299-KR - EVGA X299 Dark
142-SX-E297-KR - EVGA X299 FTW K
121-SX-E296-KR - EVGA X299 Micro ATX 2
131-SX-E295-KR - EVGA X299 Micro ATX
- First go into your BIOS and load defaults, save and reboot to Windows.
- Close all open programs.
- Go into the folder where you unzipped this package and update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
- NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.
BIOS Installation
- Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
- Reboot the machine and go into the system BIOS
- From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
- Select the .bin file you wish to flash.
Return to download center.