OS:
Windows 10 64bit
Driver Version:
1.09
Release Date:
9/4/2018
Driver File:
Download
BIOS 1.09 Updates
- Supports new NVIDIA USB 3.1
- Fixes instances where the boot logo fails to appear during boot
Windows Installation
- Download the correct .zip file below for your motherboard:
151-SX-E299-KR - EVGA X299 Dark
142-SX-E297-KR - EVGA X299 FTW K
121-SX-E296-KR - EVGA X299 Micro ATX 2
131-SX-E295-KR - EVGA X299 Micro ATX
- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and double-click update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
- NOTE: If flash box immediately closes after flash
attempt, the flash may need to be ran from a CMD prompt with
administrator privileges or DOS version.
BIOS Installation
- Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
- Reboot the machine and go into the system BIOS
- From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
- Select the .bin file you wish to flash.
Return to download center.