Drivers and BIOS

BIOS 1.07 Updates 

• Update CPU microcode for Intel security
  
• Support Intel SSD Key for VROC
• Improves smart fan speed control
• Unlock VDIMM range to 2.3V for extreme memory OC
  

This BIOS is intended to update the CPU microcode to increase security related to the reported Spectre vulnerability for processors used on X299 motherboards.  This microcode update is expected to be used in conjunction with related patches from your Operating System or VMM to ensure complete protection from reported vulnerabilities. 

Windows Installation

• Download the correct .zip file below for your motherboard:        

         151-SX-E299-KR - EVGA X299 Dark
         142-SX-E297-KR - EVGA X299 FTW K
         131-SX-E295-KR - EVGA X299 Micro ATX

• First go into your BIOS and load defaults, save and exit
• Close all open programs.
• Go into the folder where you unzipped this package and double-click update.bat
• Press Y to start the flash process
• DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
• After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
• NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

BIOS Installation

• Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
• Reboot the machine and go into the system BIOS

• From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
• Select the .bin file you wish to flash.