OS:
Windows 10 64bit
Driver Version:
1.03
Release Date:
4/21/2017
Driver File:
Download
BIOS 1.03 Updates
- Adds Optane compatibility
- **Do NOT roll back to a previous BIOS with an Optane device in use, it will likely render the OS non-bootable.**
Windows Installation
- Download the correct .zip file below for your motherboard:
134-KS-E279-KR - EVGA Z270 Classified-K
132-KS-E277-KR - EVGA Z270 FTW-K
- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
- NOTE:
If flash box immediately closes after flash attempt, the flash may need
to be ran from a CMD prompt with administrator privileges or DOS
version.
BIOS Installation
- Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
- Reboot the machine and go into the system BIOS
- From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
- Select the .bin file you wish to flash.
Return to download center.