EVGA

Drivers and BIOS

OS: Windows 10 32bit

Driver Version: 1.08

Release Date: 3/29/2016

Driver File: Download

BIOS 1.08/1.03 Updates

  • Improving NVMe device compatibility
  • Add secure boot support
  • Fix event ID 12 issue after S3 resume
  • Various smaller issues fixed

  


 
Windows Installation

  • Download the correct .zip file below for your motherboard:

         151-SS-E179-KR - EVGA Z170 Classified

         142-SS-E178-KR - EVGA Z170 Classified-K

         140-SS-E177-KR - EVGA Z170 FTW
         111-SS-E172-KR - EVGA Z170 Stinger

  • First go into your BIOS and load defaults, save and exit
  • Close all open programs.
  • Go into the folder where you unzipped this package and update.bat
  • Press Y to start the flash process
  • DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
  • After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
  • NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

  
BIOS Installation

  • Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
  • Reboot the machine and go into the system BIOS
  • From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
  • Select the .bin file you wish to flash.

Return to download center.