New Member here ...
 
 

 
 

http://tinypic.com/view.php?pic=m7gjkp&s=7

Out of curiousity, where did you get that stand for the block radiator?

It's currently in single loop ... you can see the Swiftech second pump awaiting the dual loop ... had an Eheim but these swiftechs can really push the water even at low volume (here a single Swiftech MCP650 is pushing a 9 x 120, 4 x 120 & 2 x 120 with ease at low .. ) ... now I need to figure out how to watercool my new GTX 460 ... looks like only Koolance provides the waterblock but I'll wait until EVGA has a setup so I can send my in ... I want to keep it all under warranty ...
 

The rad is... awesome...

And the stack on top just makes it even better xD

Yes thanks to all ... here's the update ... slowly but surely, it's looking more and more as the initial build design ...
 
Watercooled Digital Studio ... http://tinypic.com/view.php?pic=149thk6&s=7
  
 

eddierox

  ... looks like only Koolance provides the waterblock but I'll wait until EVGA has a setup so I can send my in ... I want to keep it all under warranty ...
 
 

Since it's an EVGA Card, you can change the cooling solution without loosing your warranty if you keep the original heatsink and remount it in case you have to RMA your card ;)

 
http://tinypic.com/view.php?pic=rvzy8l&s=7
 

Rona

That thing is way to close to the door for my comfort level >.> I can just see someone coming through the door and knocking it over.

Actually, I was trying to see if it would go through the door ... it won't unless I unhook and take down the LCD first ... so you might say this is a design flaw ... LOL ...
 

 

Clergy

Very interesting, so what are your temps with all that cooling power?

 
... at idle ...
 
 
 
http://tinypic.com/view.php?pic=2625tv4&s=7

rjohnson11

A rig definitely worthy of a BR. Congrats!

Thanks man ... I just picked up an Intel DX48BT2 and some G.Skill DDR3 (2x2G) so look for the update performance parameters ... I'll be picking up another GTX460 and QX9650 as well as another (2x2G) as I'm getting ready to go with Windows 7 Ultimate 64-Bit ... all as project in continuam ... once again thanks, Eddie
 
 

 
 
http://tinypic.com/view.php?pic=2598k85&s=7

VistaHead

Nice Rig!!  Question - are you looking up in the air to view your monitor when you are seated?

You actually have to strain a bit to look at it when standing up at the table top ... so yes it's kind of funky sitting down .... however I also have it connected to my Samsung 32 inch and extreme Adcom / Pyle Driver Audio in another part of the room via HDMI and Toslink ....
 
 

 
 

http://tinypic.com/view.php?pic=2zjmcly&s=7
 

 
http://tinypic.com/view.php?pic=2wfo96u&s=7

 

*UPDATE*
 
New Mods:
Intel DX48BT2
Thermaltake Tough Power 1200 W
G.SKILL DDR3 ~ 2 x 2G F3-10666CL9D-4GBNQ
 
Powered on once with EVGA GTX460 installed and all is good ... just purchased a Windows 7 Ultimate and will go with the 32-Bit version for now as their seems to be some issues reported with the 64-Bit with this particular G.Skill in 8G ... oh, still deciding on the QX9650 or Q9650 ... seems the  Q9650 E0 stepping is much better than the C0 or C1 QX9650 so I'm continuing research ... (I've already watercooled my Q9450 and it's very nice and stable)
 
 
 
http://tinypic.com/view.php?pic=2ij46es&s=7
 

 

SiX_Eight_Seven

Nice! I would have went with the EK blocks for the 460s (assuming they're compatible), but Koolance ones look nice as well.

I think only Koolance makes the waterblocks for the GTX460 ... not only that, they're only made for the GTX460 nvidia reference boards (circuits get in the way on all other boards) ... but I'll check it out as I 'd like to do EK next after I finish with the Koolance setup ...