|
FAQ ID # 59638
|
| Configure RAID using M.2 on the z170 Classified K Last Update : 2016/10/06 Rating : Not Rated |
Add to favorites
Print this FAQSocial Bookmark this Article : |
| Question / Issue |
 |
| How do I configure RAID using M.2 on the z170 Classified K? |
| Answer / Solution |
|
| Before starting, download the latest Intel Rapid Storage Driver and save it to a USB drive for later. - Under Advanced, go to Onboard Device Configuration, and enable both M.2 Socket3 (1) and (2). - Under Boot, set Boot Mode Select to UEFI, then under CSM Configuration set CSM Support to Disabled. - Go back to Advanced, and set SATA Mode Selection to RAID. - Save and Exit, then boot back to UEFI. - Back under Advanced, go to Intel Rapid Storage Technology and select Create RAID Volume. - Configure your RAID settings and select the appropriate drives. - Install Windows, and if your RAID is not an option to install to, chose the Load Driver option, and chose the Intel Rapid Storage Driver from your USB drive. - Chose your RAID drive, and finish installing Windows. |
| Direct Link to This FAQ |
|
| http://www.evga.com/support/faq/?f=59638 |
| Tags |
|
| z170 classified k m.2 raid configure 59638 |
