Welcome !

X58 Stability Club 4.2Ghz+ Can you make it?

Change Page: << < ..11 12 13 14 15 16 17 18 19 20 .. > >> | Showing page 14 of 40, messages 391 to 420 of 1190

Author	Message

v1ral

Total Posts : 564
Joined: 7/23/2008
Status: offline

Re:X58 Stability Club 4.2Ghz+ Can you make it? Sunday, April 17, 2011 12:27 PM (permalink)

Quite interesting.
Is my waterblock not enough to keep my temps low at least at high 60's.
Is it time to buy a new one?
I've tried to go to 4.2 but my vcore, I think will be high I will try again when I am off or have more spare time. I should have just shot straight to 4.2 when I had my system back in 08 haha.
Anyways I love this platform, so many tweaks and new discoveries with volts and what not.
I've had my vcore at 1.35 with 201 blck it's boots and everything.. starts up fast it's crazy but not IBT stable, I try to run IBT max with 5 runs then run linx 20.. then up that to 50 then just let her do her thing but with that it failed. even if I raise VTT I got it almost to +200 starting from auto then on up to +200 will going passed +200 hurt me in the temp department or should I just wing it. If go to 4.2 I have a feeling that it'll be just for bench runs which I am fine with.
This venture has taught me a few things, what adjustments to use and what works/not work. It's like I have a new rig and trying to overclocking it again.
haha
Anyways..
I am done blabbling

#391

OV3RCLK4

Total Posts : 3632
Joined: 8/29/2008
Location: Tallahassee, FL
Status: offline
Ribbons: 16

Re:X58 Stability Club 4.2Ghz+ Can you make it? Sunday, April 17, 2011 10:36 PM (permalink)

Here is my 4.6ghz OC with HT Off. VTT is @ +50mv (1.25) Uncore is around 3500mhz x16
For every increase of 200mhz on the uncore starting from x16, you need to add at least +50mv.

So for my chip, I use this template when overclocking... [3500mhz +50mv] [3700mhz +100mv] [3900mhz +150mv] [4100mhz +200mv]

Now keep in mind that this CPU is an excellent overclocker.
My previous chip looked like this...
[3200mhz +50mv] [3400mhz +100mv] [3600mhz +150mv] [3800mhz 225mv] [4000mhz +300mv]

Max OC on old chip was 196x21 2:10 with 1.4375 Vcore, HT ON,
Max OC (So far) on my new chip is 220x21 2:8 1.4375, HT OFF

Speedstepping is always enabled on my PC, So as soon as i stopped linx, the cpu multiplier dropped down, so that is why it doesnt actually show 4.6ghz, my mistake when taking the screeny.

I lowered Vcore to 1.425 and got through 8 tests before I stopped it because my gflops had dropped to 64-65 and not a constant 66 like in my screenshot.

HEATWARE

EVGA X58 Classified E760 - Core i7 920 2.8ghz @ 4.6ghz - 3x2GB Patriot Viper II 2000mhz 8-8-8-24

3x EVGA GTX 480 - 2x EK VGA Supreme - Corsair 1200AX Power Supply - Cooler Master Haf X Case

Black Ice GTX 360 Radiator - MO-RA3 - EK Supreme HF Full Copper - XSPC Dual Bay Reservoir w/ MCP-655

#392

rafale Total Posts : 1582 Joined: 1/9/2010 Location: Portland, OR Status: offline Ribbons: 6	Re:X58 Stability Club 4.2Ghz+ Can you make it? Sunday, April 17, 2011 10:37 PM (permalink) Ho ho... I decided to rerun my setup at 4.5GHz with a small Vcore bump by upping just the multiplier. Looks like I am stable with 89ish Gflops. Kram get ready to update my results... Gotta love that little Asetek unit. Can't wait to see what the 920 will get me.
	#393

rafale Total Posts : 1582 Joined: 1/9/2010 Location: Portland, OR Status: offline Ribbons: 6	Re:X58 Stability Club 4.2Ghz+ Can you make it? Monday, April 18, 2011 12:08 AM (permalink) Here you go Rafale Core i7 980X Batch # 3032A341 CPU clocked at: 4.5GHz Voltage: 1.412 Idle temps: 25, 16, 26, 34, 32, 22 Load temp: 80, 77, 75, 79, 85, 80 GFlop peak: 88.2306 Ambient temperature: 23C <message edited by rafale on Monday, April 18, 2011 1:09 AM>
	#394

B3NJ1

Total Posts : 500
Joined: 8/21/2009
Status: offline
Ribbons: 1
Folding: 758,019

Re:X58 Stability Club Monday, April 18, 2011 2:27 AM (permalink)

B3NJ1
Core i7 920 D0 Batch N/A
CPU clocked at: 4210mhz
Voltage: 1.376
Idle temps: 42C 42C 45C 40C
Load temps: 83C 81C 82C 77C
GFlop peak: 54.77

X58 Classified - E760 ... i7 920 (D0) @ 4210mhz .... G Skill Trident 6gb @ 1600MHz 7-8-7-20
EVGA GTX 570 Superclocked Edition - TRI SLI
My Affiliate Code: ZIQXDYRZ56

#395

kram36 Total Posts : 11804 Joined: 10/27/2009 Location: United States Status: offline Ribbons: 38	Re:X58 Stability Club Monday, April 18, 2011 3:18 AM (permalink) rafale, got your stats updated. Nice job. sam350 and B3NJ1, you guys need to list your info correctly. Please make appropriate changes so I can get you added. I will no longer do business with EVGA.
	#396

direraptor22

Total Posts : 5019
Joined: 10/14/2008
Location: Optimal cruise altitude!
Status: offline
Ribbons: 15
Folding: 3,463,356

Re:X58 Stability Club Monday, April 18, 2011 10:22 AM (permalink)

Damn Rafale I don't understand how you can get your temps so low with such high VCore... teach me your ways of installation plz

- Main Z77 Gaming Rig

- Secondary MicroATX Z77

- Mini-ITX H77 Home Server

“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor

#397

rafale

Total Posts : 1582
Joined: 1/9/2010
Location: Portland, OR
Status: offline
Ribbons: 6

Re:X58 Stability Club Monday, April 18, 2011 11:20 AM (permalink)

direraptor22

Damn Rafale I don't understand how you can get your temps so low with such high VCore... teach me your ways of installation plz

You know I am not using the stock fans right?
I have GT AP-29 in push with a feser shroud and then a TY 140 pulling...
I just followed the instructions for the mounting without reading them.

#398

direraptor22

Total Posts : 5019
Joined: 10/14/2008
Location: Optimal cruise altitude!
Status: offline
Ribbons: 15
Folding: 3,463,356

Re:X58 Stability Club Monday, April 18, 2011 11:33 AM (permalink)

rafale

direraptor22

Damn Rafale I don't understand how you can get your temps so low with such high VCore... teach me your ways of installation plz

You know I am using the stock fans right?
I have GT AP-29 in push with a feser shroud and then a TY 140 pulling...
I just followed the instructions for the mounting without reading them.

The AP-29 explains it... and you mean "you're NOT using stock fans" right?

Oh yeah, I forgot about your ambient temps... mine is usually 28-30C

- Main Z77 Gaming Rig

- Secondary MicroATX Z77

- Mini-ITX H77 Home Server

#399

rafale Total Posts : 1582 Joined: 1/9/2010 Location: Portland, OR Status: offline Ribbons: 6	Re:X58 Stability Club Monday, April 18, 2011 11:42 AM (permalink) I corrected my typo. That's what happens when you are typing with a newborn hanging on your arms. That hot in Austin already huh?
	#400

direraptor22

Total Posts : 5019
Joined: 10/14/2008
Location: Optimal cruise altitude!
Status: offline
Ribbons: 15
Folding: 3,463,356

Re:X58 Stability Club Monday, April 18, 2011 12:21 PM (permalink)

rafale

That hot in Austin already huh?

Sigh...

Today's high is around 95, tomorrow it gets close to 100. I'm in the wrong part of the world lol

- Main Z77 Gaming Rig

- Secondary MicroATX Z77

- Mini-ITX H77 Home Server

#401

mistermister Total Posts : 5092 Joined: 3/29/2008 Location: San Diego Status: offline Ribbons: 11 Folding: 2,268,671	Re:X58 Stability Club Monday, April 18, 2011 2:19 PM (permalink) Doesnt help that your state is on fire.
	#402

PCTools

Total Posts : 1631
Joined: 1/29/2007
Status: offline
Ribbons: 3

Re:X58 Stability Club Monday, April 18, 2011 5:14 PM (permalink)

PCTools

IN PROCESS OF UPDATING TO THE NEWEST SOFTWARE AND WILL REPOST.

I7 - 950 CPU @ 4.5Ghz
6 X 2TB WD Green 64 Cache
2 X 2TB WD Element
GTX 580 SC with DD Water Block -> The Beast
DD Mosfet Water Block
DD MC-TDX CPU
DD NB/SB
Dominator 1600 DDR3 7-7-7-17-1T @ 1.5V

#403

OV3RCLK4

Total Posts : 3632
Joined: 8/29/2008
Location: Tallahassee, FL
Status: offline
Ribbons: 16

Re:X58 Stability Club Monday, April 18, 2011 5:33 PM (permalink)

@PCTools
Before you post, go back to the first page and read the instructions 1 more time. You need to use 25000 problem size (not 10000), and a ALL-IN-ONE Screenshot like this. http://i.imgur.com/pDA4H.jpg

HEATWARE

EVGA X58 Classified E760 - Core i7 920 2.8ghz @ 4.6ghz - 3x2GB Patriot Viper II 2000mhz 8-8-8-24

3x EVGA GTX 480 - 2x EK VGA Supreme - Corsair 1200AX Power Supply - Cooler Master Haf X Case

Black Ice GTX 360 Radiator - MO-RA3 - EK Supreme HF Full Copper - XSPC Dual Bay Reservoir w/ MCP-655

#404

B3NJ1 Total Posts : 500 Joined: 8/21/2009 Status: offline Ribbons: 1 Folding: 758,019	Re:X58 Stability Club Monday, April 18, 2011 7:51 PM (permalink) Edit: Fixed my temps on my post <message edited by B3NJ1 on Monday, April 18, 2011 7:56 PM> X58 Classified - E760 ... i7 920 (D0) @ 4210mhz .... G Skill Trident 6gb @ 1600MHz 7-8-7-20 EVGA GTX 570 Superclocked Edition - TRI SLI My Affiliate Code: ZIQXDYRZ56
	#405

kram36 Total Posts : 11804 Joined: 10/27/2009 Location: United States Status: offline Ribbons: 38	Re:X58 Stability Club Monday, April 18, 2011 8:08 PM (permalink) B3NJ1, got you added. I will no longer do business with EVGA.
	#406

sam350

Total Posts : 44
Joined: 5/15/2009
Status: offline

Re:X58 Stability Club Tuesday, April 19, 2011 4:23 AM (permalink)

Sam350
Core i7 990X Batch Unknown
CPU clocked at: 4.714GHz
Voltage: 1.576
Idle temps: 28,35,26,28,42,36
Load temp: 77,81,71,72,82,80
GFlop peak: 85.93
MY ATTACHED IMAGE SAYS ERROR BUT CAN STILL VIEW WEIRD ALLWAYS U HAVE MY SCREENSHOT FROM LAST TIME

Attachment(s)Attachments are not available: Download requirements not met

i7:990x@4.7ghz 100% stable
motherboard: evga x58 classified 3
ram: corsiar 2000mhz 3x6g@ 7-8-7-1T 1700mhz
graphics: 3x msi gtx580's@ 870 core 2150 mem air cooled
cooling: ek supreme water block cpu, 120.3 rad, 140.1 rad, swiftech pump, xspc resivour

#407

kram36 Total Posts : 11804 Joined: 10/27/2009 Location: United States Status: offline Ribbons: 38	Re:X58 Stability Club Tuesday, April 19, 2011 4:39 AM (permalink) sam350, got you added. I will no longer do business with EVGA.
	#408

G__ROW Total Posts : 74 Joined: 4/27/2008 Status: offline Folding: 14,471	Re:X58 Stability Club Tuesday, April 19, 2011 6:49 PM (permalink) Couldn't let rafale beat me (at least in clock speed) :P I think this is the furthest I'm going with my current cooling setup. G__ROW Core i7-980x Batch #: 3032A341 CPU clocked at: 4.6 Ghz Voltage: 1.393 Idle temps: 28, 24, 26, 25, 18, 25 Load temps: 83, 82, 75, 78, 80, 81 GFlop peak: 86.5251
	#409

rafale Total Posts : 1582 Joined: 1/9/2010 Location: Portland, OR Status: offline Ribbons: 6	Re:X58 Stability Club Tuesday, April 19, 2011 7:11 PM (permalink) Ohh man... Not fair, you are on water. jk' Wait until I get my Antec 920... You have an amazing chip though. Mine from the same batch doesn't clock that well with so little voltage. Congrats!
	#410

kram36 Total Posts : 11804 Joined: 10/27/2009 Location: United States Status: offline Ribbons: 38	Re:X58 Stability Club Tuesday, April 19, 2011 7:18 PM (permalink) Updated listing. I will no longer do business with EVGA.
	#411

G__ROW Total Posts : 74 Joined: 4/27/2008 Status: offline Folding: 14,471	Re:X58 Stability Club Tuesday, April 19, 2011 7:32 PM (permalink) rafale Ohh man... Not fair, you are on water. jk' Wait until I get my Antec 920... You have an amazing chip though. Mine from the same batch doesn't clock that well with so little voltage. Congrats! Thanks. Going to do some case modding this summer so I can fit some bigger radiators and cool my GPUs. Might try again then
	#412

rafale Total Posts : 1582 Joined: 1/9/2010 Location: Portland, OR Status: offline Ribbons: 6	Re:X58 Stability Club Tuesday, April 19, 2011 8:18 PM (permalink) Just received my Antec Kuhler 920 as I got home. Will be posting a thread in the general hardware section. I think I have one of the first units as I preordered it... I think I'll beat again this week.
	#413

Halo_003

Total Posts : 11437
Joined: 3/20/2009
Location: 0°K
Status: offline
Ribbons: 48
Folding: 798,171

Re:X58 Stability Club Tuesday, April 19, 2011 8:26 PM (permalink)

Nice Rafale I'll be watching for that.

Working on stabilizing my 960 at 4.63 right now.. Psst OC... You're in trouble..... I haven't even had this CPU for a week yet, and it does 4.5Ghz @ 1.4V.

X79 Classified - i7 3820 @ 4.756GHz - 4x2GB Dominator GT 2000C8 - GTX 580 Classified ULTRA - GTX 480 - SPH 1300W - Vertex 2 90GB RAID 0 - 2TB WD Black

Gigabyte X58A-OC - i7 960 @ 5.32GHz - X5570 ES @ 5.01GHz - 3x2GB Project X 2000C7 - GTX 285 Classified - GTX 295 x2 - 9800GX2 - SPH 1050W - Vertex 120

Twitter---Mods Rigs---Heat---CMHD---MARS 2012---Cooler Master Americas[/ce

#414

EVIIILJ

Total Posts : 1232
Joined: 3/20/2007
Status: offline
Ribbons: 15
Folding: 17,276,820

Re:X58 Stability Club Thursday, April 21, 2011 12:13 AM (permalink)

EVIIILJ
Core i7 970
CPU clocked at: 4.25Ghz
Voltage: 1.352 Load
Idle temps: 23, 24, 28, 35, 30, 30
Load temps: 63, 65, 63, 66, 65, 64
GFlop peak: 77.1687

EDIT : Crap, I forgot the damn time... Let me redo it and get back to you in the next couple of days. I'm folding atm and don't want to stop the bigadv6901 until 4/22 in the a.m. I will update this post with the new info and correct screenshot. I of course closed that damn linx window after the screenshot....DOOOHHHH!

#415

rafale Total Posts : 1582 Joined: 1/9/2010 Location: Portland, OR Status: offline Ribbons: 6	Re:X58 Stability Club Thursday, April 21, 2011 12:21 AM (permalink) I think we can see your time just fine. no?
	#416

kram36 Total Posts : 11804 Joined: 10/27/2009 Location: United States Status: offline Ribbons: 38	Re:X58 Stability Club Thursday, April 21, 2011 3:18 AM (permalink) Nice job EVIIILJ. Welcome to the Club. I will no longer do business with EVGA.
	#417

direraptor22

Total Posts : 5019
Joined: 10/14/2008
Location: Optimal cruise altitude!
Status: offline
Ribbons: 15
Folding: 3,463,356

Re:X58 Stability Club Thursday, April 21, 2011 7:37 PM (permalink)

Update on my part: I just received my Dominator RAM today!

Will get rid of my XMS3 and retest stability tonight... actually I'm gonna get right to it now! *shuts off PC*

- Main Z77 Gaming Rig

- Secondary MicroATX Z77

- Mini-ITX H77 Home Server

#418

uelreq Total Posts : 28 Joined: 5/26/2007 Status: offline Folding: 2,439	Re:X58 Stability Club Thursday, April 21, 2011 9:54 PM (permalink) I dont like Linx it keeps maken me get bsod can we use something else :) getting there
	#419

direraptor22

Total Posts : 5019
Joined: 10/14/2008
Location: Optimal cruise altitude!
Status: offline
Ribbons: 15
Folding: 3,463,356

Re:X58 Stability Club Thursday, April 21, 2011 11:09 PM (permalink)

Argh, with the Dominators + exact same BIOS settings I ran with the XMS3 I crashed after 14 passes of LinX, BSOD code 1E (increase vcore)... sigh, bumped my VCore up a notch and retesting... *prays*

- Main Z77 Gaming Rig

- Secondary MicroATX Z77

- Mini-ITX H77 Home Server

#420