Welcome !!!

P67/Z68 Full Chipset Waterblock FINISHED

Change Page: 1 2 3 4 5 6 7 8 9 10 .. > >> | Showing page 1 of 15, messages 1 to 30 of 429

Author	Message

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

P67/Z68 Full Chipset Waterblock *FINISHED* Thursday, March 03, 2011 11:54 AM (permalink)

Finally, after a few months of planning and some unexpected hiccups... you have before you a finished block.

The O-rings:

All Blacked out:

Look how nicely the radius of the curves mate.

Lists of updates:

Skip to go right here for pictures:
http://www.evga.com/forum...p;m=887470&mpage=6

Update: January 2012, after a complete machine rebuild there is more progress to be made!
http://www.evga.com/forum...0&mpage=11#1398507

UPDATE: January 2012... ALMOST DONE! At the 90% mark. Here are copper pics:
http://www.evga.com/forums/fb.ashx?m=1407565

Attachment(s)Attachments are not available: Download requirements not met

EVGA SRX WATERBLOCK SR2 WATERBLOCK - GTX 580 WATERBLOCK - GTX 460 2WIN WATERBLOCK
P67/Z68 WATERBLOCK - VOODOO5 6000 DOUBLE WATERBLOCK - GTX 690 WATERBLOCK
AIR COOLED WATERBLOCK - DD REPLACEMENT TOP
HOME MADE CNC - EVGA X58 Micro Waterblock - ASRock Extreme 11 Waterblock
nateman.doo@gmail.com e-mail me for quickest response.
"If your water blocks were people, I would watch them from a distance because I'm too socially awkward to approach them." -RockThePylon (OCN)

konohahokage Total Posts : 297 Joined: 5/31/2006 Location: So Cal. Status: offline Folding: 616,148	Re:P67 Full Chipset Waterblock Thursday, March 03, 2011 2:52 PM (permalink) Sure. Make one with either an EVGA in the copper or Classified.
	#2

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

Re:P67 Full Chipset Waterblock Thursday, March 03, 2011 3:21 PM (permalink)

I was thinking about the E, but wasn't sure what the radius of the "E"

DMIINC Total Posts : 5799 Joined: 3/2/2007 Location: Suwanee, GA Status: offline Ribbons: 32 Folding: 537,997	Re:P67 Full Chipset Waterblock Thursday, March 03, 2011 4:19 PM (permalink) Go Nate, go...... On the Classy NF200 will be where?
	#4

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

Re:P67 Full Chipset Waterblock Thursday, March 03, 2011 4:25 PM (permalink)

I have been looking all day for a naked picture of the new Classy. If you can find one... HOOK ME UP! :)
Even the base model would be nice. Can't find many good ones.

konohahokage Total Posts : 297 Joined: 5/31/2006 Location: So Cal. Status: offline Folding: 616,148	Re:P67 Full Chipset Waterblock Thursday, March 03, 2011 4:34 PM (permalink)
	#6

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

Re:P67 Full Chipset Waterblock Thursday, March 03, 2011 4:56 PM (permalink)

Yup, thats the one, but I need a picture without the heatsinks ("naked")

konohahokage Total Posts : 297 Joined: 5/31/2006 Location: So Cal. Status: offline Folding: 616,148	Re:P67 Full Chipset Waterblock Thursday, March 03, 2011 5:02 PM (permalink) Hmm.. not sure if a naked shot is out. I would think only EVGA would have a naked shot.
	#8

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

Re:P67 Full Chipset Waterblock Thursday, March 03, 2011 5:16 PM (permalink)

well, if anyone was testing the board, they might in some sort of review. "Speculation of course"

Theboatswain

Total Posts : 458
Joined: 12/19/2006
Location: Washington, Poulsbo
Status: offline

Re:P67 Full Chipset Waterblock Wednesday, August 03, 2011 8:34 AM (permalink)

Thanks Nate! I was going to put a note I my post but this is better it is from you! I am all in!

EVGA P67 FTW K2, 2600K OC 4.5 @ 1.30V Best 5.0@1.425v GSKILL F3-1700CL9D-8GBXLD DDR3-2133@1.65v,
2 EVGA GTX 580 OC's + VID-NX580 X (2) (850/1700/2098) , Asus Xonor XD, 2 120 GB OCZ Solids 3 in Raid 0 Operating System Drive, 120 GB OCZ Vertex 2 Fast File Drive, 1 WD 1 TB Back Drive Back Up Drive, LG Bluray CD/DVD DVDRW Drive, Cooler Master Silent Pro Gold 1200 PSU, Corsair 700D Case for MB, Thermaltake TR2 430, Cooler Master ATCS 840 Case For Rads and Pumps, WIN 7 64 Ultimate EK Suprem HF CU Water Block, Nate Man Do Chipset and Vreg block, 3 Swiftech MCP 655 Pumps, Feser X-changer Triple for CPU Loop w/ home mods, & Coolgate 360 For Video Cards & Chipset Loop.
3Dmark Vantage score P55099
3Dmark 11 score P13264

#10

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

Re:P67 Full Chipset Waterblock Wednesday, August 03, 2011 10:13 AM (permalink)

I need a new public affairs officer, cause the one I got (me) needs to be fired =P

As soon as I get the board, I will start the design process.

#11

lascivious1

Total Posts : 1992
Joined: 2/2/2007
Status: offline
Ribbons: 3

Re:P67 Full Chipset Waterblock Wednesday, August 03, 2011 11:48 AM (permalink)

I saw some one asking about removing the HS on the one with the EVGA logo on it and saw Matt and Jacob say that it should not be removed or it coulndt be removed. check into it...

EVGA P67 / 2600K @ 4.5ghz @ 1.3v / Corsair H80
Corsair Vengence 8gbs 8-8-8-24 @ 1.5v / EVGA 580GTX 3GB / X-FI Fatality Pro
WD Raptor 150GB / WD Caviar 80GB / WD Caviar 750GB
SONY 32" EX500 / Cooler Master HAF 932 Custom Case

.

#12

whitnasty1

Total Posts : 2476
Joined: 12/26/2010
Location: North Carolina
Status: offline
Ribbons: 5
Folding: 18,600

Re:P67 Full Chipset Waterblock Wednesday, August 03, 2011 12:16 PM (permalink)

I believe they were referring to the mobo being ran without the heatsink on the NF200, I am pretty sure you can remove all of the heat sinks on the motherboard, I saw a review that had them all removed, I will try to find that real quick. I am at work right now, or I would pop the other side off of my case and check it out, will do it when I get home.

Project Name: "Dragon Slayer" /Case: Cooler Master HAF-X /CPU: Intel i7-2600k @ 4.8Ghz /MoBo: EVGA P67 FTW E679 w/ ECP /CPU Cooling: Corsair H70 w/ Gentle Typhoon AP-15's /RAM: 8GB G.Skill RipJaws @1600Mhz (Red) /GPU: 2xEVGA GTX 660ti FTW Signature 2 SLI /GPU Cooling: Additional 120mm EverMax fan /Sound Card: Creative SB X-Fi Titanium /PSU: Corsair AX1200 /Optical Drive: ASUS DVD/CD R/RW; Samsung Blu Ray Drive /SSD: Intel 520 Series 120GB SSD SATA III (OS) / Intel 320-series 40GB (Data) / HDD: 1TB Samsung SpinPoint F3 7200kRPM /Monitor: Acer P236H (1920x1080)

#13

Blizzie Total Posts : 5449 Joined: 7/4/2007 Location: California Status: offline Ribbons: 17 Folding: 5,756,352	Re:P67 Full Chipset Waterblock Wednesday, August 03, 2011 12:57 PM (permalink) The heatsinks on the motherboard should all come off. Jacob didn't want them removed because.. well, why would you want to remove a heatsink. It's there to dissipate heat. If you swap all the sinks with waterblocks an give it a third party cooling it will be okay.
	#14

ESOOGYERG

Total Posts : 351
Joined: 10/9/2008
Status: offline
Folding: 523,998

Re:P67 Full Chipset Waterblock Wednesday, August 03, 2011 2:37 PM (permalink)

Blizzie

The heatsinks on the motherboard should all come off. Jacob didn't want them removed because.. well, why would you want to remove a heatsink. It's there to dissipate heat.

If you swap all the sinks with waterblocks an give it a third party cooling it will be okay.

Can anyone confirm if the P67/Z68 will share the same layout? Would be awesome if they do, cause then these blocks would fit both boards.

#15

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

Re:P67 Full Chipset Waterblock Wednesday, August 03, 2011 2:50 PM (permalink)

Rumor has it, that it will (but I wouldn't know until I have one of each in hand). That will be win for everyone. Even if its "slightly" different, holes can be re-programmed, or extra extrusions can be added for various components such as caps & coils.

#16

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 7:23 AM (permalink)

I need input:

How many of you use SLI on this board, and what are your configurations? As in, which slots do you use for SLI?
watercooled GPU's or air cooled?

#17

LOurs

Total Posts : 107
Joined: 7/13/2009
Status: offline
Folding: 43,880

Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 7:57 AM (permalink)

I gonna use tri-sli of GTX 275 OC (watercooled) and 2600K OC @ 4.5-5 GHz (watercooled too) in 2 loop:
Res - D5 - Nova 1080 - GPUs (EK-WB) - Res
and
Res - DDC 18W - BlackIce GTS 240 - EK suprem HF - BI GTS 120 - BI GTS 120 - Res
For tri-sli I'll use PCIe #1 3 and 5, I guess.
Maybe I'll switch Nova and the 3 BlackIces

LOurs's P67 first
i7 2600K @ 4.4 Ghz on air        4x Caviar Green 2To Raid5
2x Evga GTX 275                       Corsair AX1200W
2x Velociraptor Raid0                Antec Nine hundred two

#18

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 8:59 AM (permalink)

It is a delicate balance with using air, and water cards. Since most waterblocks are much thinner then huge stock air coolers, I can probably fit a barb directly over the P67 chip, and your hose will come up inbetween the cards, but this setup may only accommodate Tri-SLI watercooled, not air.

#19

LOurs

Total Posts : 107
Joined: 7/13/2009
Status: offline
Folding: 43,880

Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 9:04 AM (permalink)

all cards are watercooled, and with card WB, not just GPU WB.

I'll use one CPU WB, tree videocards WB and your mobo's WB (nothing for my velociraptor/HDD)

LOurs's P67 first
i7 2600K @ 4.4 Ghz on air        4x Caviar Green 2To Raid5
2x Evga GTX 275                       Corsair AX1200W
2x Velociraptor Raid0                Antec Nine hundred two

#20

nayaland

Total Posts : 10
Joined: 2/13/2009
Status: offline

Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 9:11 AM (permalink)

I have CPU-370 and GTX 580 3GB Hydro 2 in single loop.

1st PMP 400 pump -> 2nd PMP 400 pump -> CPU-370 -> BLACK ICE 280 -> GTX 580 -> BLACK ICE 360 -> RP-401X2 Reservoir.

It would be nice if I could get the P67 FTW Full Water Block.

NAYA

EVGA P67 FTW, SB 2600K 5.2GHz, CPU-370
8GB G. SKILL RIPSJAW X DDR3 1866
VERTEX 3 240GB RAID 0, WD 2TB RAID 0
CORSAIR AX1200, 360 & 280 RADIATORS
GTX 580 3GB HYDRO 2 SLI, CORSAIR OBSIDIAN 800D
GTX 285 dedicated PhysX

#21

ESOOGYERG Total Posts : 351 Joined: 10/9/2008 Status: offline Folding: 523,998	Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 9:49 AM (permalink) Using slots 2 and 5 in SLI is perfectly fine, And you'd easily be able to sneak a barb just below the first card even with an air cooler and still clear the card in slot 5. <message edited by ESOOGYERG on Thursday, August 04, 2011 10:06 AM>
	#22

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 10:57 AM (permalink)

What is your slot population?

#23

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 11:46 AM (permalink)

ESOOGYERG

Using slots 2 and 5 in SLI is perfectly fine, And you'd easily be able to sneak a barb just below the first card even with an air cooler and still clear the card in slot 5.

Thats sort of the plan, but then the Tri-SLI people can't use that third card.

#24

LOurs

Total Posts : 107
Joined: 7/13/2009
Status: offline
Folding: 43,880

Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 11:55 AM (permalink)

I think that best plan is: Hose over NF200 and 2 loop: one passing trough mofset etc and a small one passing over p67 chipset.
This way any multi-card build can fit.
Or maybe an input at right mofset and the output over NF200 after a trip over p67.

LOurs's P67 first
i7 2600K @ 4.4 Ghz on air        4x Caviar Green 2To Raid5
2x Evga GTX 275                       Corsair AX1200W
2x Velociraptor Raid0                Antec Nine hundred two

#25

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 12:37 PM (permalink)

Can anyone measure that choke point between that cap, and the bendy thing of the 1st pci-e slot? Thats what it all comes down to.

#26

ESOOGYERG Total Posts : 351 Joined: 10/9/2008 Status: offline Folding: 523,998	Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 3:51 PM (permalink) Oh wow, I misread your post this morning my bad.
	#27

nateman_doo

Total Posts : 8842
Joined: 1/16/2008
Location: NOT the Jersey shore
Status: offline
Ribbons: 43
Folding: 1,195,588

Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 6:04 PM (permalink)

What did u misread?

#28

tblakley Total Posts : 41 Joined: 1/12/2009 Location: Fort Worth, Texas Status: offline	Re:P67 Full Chipset Waterblock Thursday, August 04, 2011 6:08 PM (permalink) Nate, Nice work on your previous builds.
	#29