so i will tell something about myself
i'm from belgium, and like to bench, but done a hole year nothing, last year in december i was 49th of the world on hwbot, now
with the big update i dropped to 240th place or so.
 
This build is made possible by and  thanks to Aquatuning

 Xtreme Case Mods

 
IT-Service


Cooler Master

Zetix


so now is it time to get the cpu pot and dewar for ln² out of the dust and get some more points back
first here are some pic of my rig at the moment that needs to be finished first :
 


http://i49.tinypic.com/2u6e5wo.jpg
http://i49.tinypic.com/2rwnxpf.jpg
http://i49.tinypic.com/2u8w7wh.jpg
http://i50.tinypic.com/30vhvgh.jpg
http://i50.tinypic.com/15wnipt.jpg
http://i47.tinypic.com/ixthug.jpg
http://i50.tinypic.com/dvka5k.jpg
also needs some red led's in it :
http://i45.tinypic.com/27y5ugj.jpg
http://i50.tinypic.com/1zeea1v.jpg
http://i48.tinypic.com/15oiek8.jpg
http://i50.tinypic.com/1628hty.jpg
Drivebay with a sata cable with red neon :
http://i47.tinypic.com/denzmc.jpg
http://i45.tinypic.com/27y5ugj.jpg
http://i30.tinypic.com/33p4jm8.jpg
http://i31.tinypic.com/2uzyqrp.jpg
http://i25.tinypic.com/4ibz4j.jpg
Boreas chiller :
http://i27.tinypic.com/2mq517n.jpg














 
http://i31.tinypic.com/2ef5ocy.jpg
 
 



http://www.youtube.com/watch?v=tg4mQPt8K-E










get my custom plexiglas i let make at the lasercutter, new pics will follow tomorrow :







http://www.youtube.com/watch?v=W472AlaLsbA
http://www.youtube.com/watch?v=W472AlaLsbA

change the power for the led's in the Corsair HX1000 psu what i made see tru,
and put the first led's in the 5mm fan shroud for the boreas chiller :
PSU


De Boreas Chiller :





the boreas chiller is finished, no to the Freezone Elite and Freezone V1. :
new TEC plates in tha house, so now i can finish the Freezone V1 cooler :



the psu painting in black , de ******** for the TEC's :



the Coolit Boreas is finished, now the dual bay psu and the rest of coolers :




De ******** dual bay psu is also finished, pianted outside black, and inside silver for putting the light nice out,
only the psu front i need to put back :

painted because it looked like this in gold  :

video with how it looks all now :
http://www.youtube.com/watch?v=VThbPrN9UPI
psu with the front plate ready :


FuFuFuFuFuFuFuFu TMS-200 with expansion board with connectors from UK :


FuFuFuFuFuFuFuFu TMS-200 with expansion board modding :



I got some connector to short, need to order more

 
 

today i customized the 3D fangrill so it fits on my Coolit Boreas Chiller :
This was how it looks standard :

And after the adjustment, who see the difference ???? lol   :tong:


And this is how it going to fit in black and red on the Chiller :



MAt Black acryl bended with a heatgun, for detail for the Boreas chiller on the HDD bays.

now waiting to receive the mobo hopefully this week, or at last beginning next week.
Also a nice toy for OC, the Evga EVbot.
The motherboard (hopefully this week)
Mobo SR-2 link info

Nice toy for OC on the mobo :
EVbot link info


Only problem is that the case needs a big adjustment for fitting the mobo in the case,
but it will work how i whant it.
i can also use a backplate likes this, but i will keep the original backplate of mobo, but adjust it :

If you look at the sizes of the Classified ATX mobo (30.5 x 26.4cm) against a SR-2 E-ATX (34.6 x 38cm) :

the case will need some adjustments lol.

Mounting for the Boreas Chiller made, was first the HDD trays.
Now made mat black acryl with behind the mounting plates for the boreas chiller.
And still need to finish it nice off and put holes for the cables of the boreas :



the koolanc controller has new connectors, now only small smd-led's in it for some red light and it is finished

now i have 1 koolanc flowsensor, atx power and the internal usb done :




i made already last night some modifications to the tray to fit the mobo,
but the case also needs some modification, and the box to close it over the mobo, needs to be bigger also.
i just can't get it closed completly, look at the pic good :


very small update, making little adjustments on the fan for a little more airflow.
this is how it looked after i changed the outside :

a first little piece is changed, tomorrow will be more :

and this is what we going to change :

Here's the 3d fan grill in primer with the adjustments for a little more airflow, ready to sand again :


the mounting for the Boreas chiller is ready exept for the holes to put the wires and tubing tru :

fan grill got it first paint job , is get dry now :

and the front plate for the drive bays has a primer :

and first paint job in mat black (just fresh, needs to dry) :

front plate drive bays :


cpu are in ta house !!
even the same batch number batch, matched pair



Little update,
Coolit Freezone Elite is ready to and cpu's are on the mobo ,
And here are some pics of the total view :





today i sleeved the cables for the Evga EVP OC Panel V3,
Also the flat ide cable etc
And made a cable to extend the Connector from the motherboard EVbot in the IO-Shield to the front of the pc :
enjoy the pics :




Here you see the difference between the Classified ECP Panel, and the SR-2 ECP Panel V3 :

Extending cable for the EVbot :


Also did some cables of the coolit coolers and the Psu for it, the ******** Dual bay 650w psu :

Enough MDPC-X sleeving (few hondred meters) ?

changing the connecting on my mobo in 90° angle :


allmost finished, just have to make it nice :





Two koolance 360 rev1.1 , and koolance SR-2 Classified full cover block are arrived :


after received it, let's open up the full cover block SR-2 and change it a little bit :

a lot of sanding it to get the nickel of it, and then the first layer of primer :



first layer mat black is on, tomorrow sanding it and paint it the last time for finishing touch,
after when it's dry mount the block again and put it on the motherboard :



SR-2 full cover block is ready and mounted :




Now i'm again doing little sleeving, and this week making also the 90° angle for the cpu power connectors.
And making a new motherboard cover of the case, it needs to be bigger (bigger mobo then normal fit the case)
pics of what i did today :
from this :

i made these, and a little bit more, only waiting for a new shipment of red connectors :

received package with connectors :


i made this, and have to make more of them for the other cpu and vga power on mobo :






and for the 90° corner of mobo has his place, tru the wall behind the Boreas Chiller, and also the tubing for the little isolated reservoir :




The other cpu his power cable is also done, and the PciE cable also :



Total overview of the powercables on the motherboard, the green circle is where the cables leave the case to the other side for connection to the powersupply :

new parts in :
Evga SR-2 1200w (peakload 1700w) psu

Due to U.S. regulation, power draw over a typical household 110-volt AC line limits the PSU-1300ATX-12N to 1300W. However, the unit is fully capable of a continuous 1700 watts when powered from a 220V AC circuit. Users are responsible for supplying adequate AC power for the PSU-1300ATX-12N.

PciE connector for GPU's with a 2200UF (MicroFarad) condensator and ferrit-cores :

Cpu ATX power connectors, also with 2200UF (microFarad) Condensator and ferrit-cores :

and te best part of the power supply is on the back of it lol :

also i got two red displays in for on my controller.
To swat the green light lcd out for a red symbol / black background display  :


take a HB624 controller with ALMEGA88V chip  :

put some cables and a  pot meter on it :

with the pot meter 10K i can adkust the screen light :
To see real time the 12v rail of the SR-2 powersupply, and monitore the power drawn of the three coolit coolers :


cpu disable jumpers soldered for make the connector for it in front of the case :

need to cut new Socket isolation because SR-2 has no big condensators next to the sockets, so i can use some more isolation : :

putted also three temp sensors under the full cover blok, to measure the CPU PWM 1 en 2 and the NB temp
with a Koolanc TMS-200 controller :



total overview of the mobo in current state:

today little testing en measurement, the boreas chiller and the freezone will be hanged on the power use controller.

but a lot of cables here that needs to be in the case fitted.

Alu plate of 1.5mm is in, tomorrow making the adjustment of the  mobo cover :


Today being busy with making place for all the usb cables, power led, hdd led etc to go away from mobo as fast as possible, not to show to much cables in case.
Also adjusting some things to get the mobo cover enlargement fitted on case,
used a lot of dremel cutting disks :

And because the Evga SR-2 mobo doesn't have condensators like a normal LGA1366 mobo around the socket, i needed to make some new socket isolation kits for around cpu with more amramflex, pictures will say enough :

And here you see the normal cut-out of a lga1366 socket kit and that for a Evga SR-2 mobo :

just bended the alu plate in the same curve as the standard mobo cover also have :

The curve in the red circle, the green lines is untill where the mobo cover needs to get bigger for the bigger mobo :


The original mobo cover has a serious cut-out for the adjustment,
and you see the four square holes for mounting the new alu plate :

This is the bottom of the original mobo cover, is a serious cut-out on,
so Quad sli GTX480 still fitts :

The new alu plate working on :

And here it's fitted on the case base plate :

Nice fit :

And with the base plate of the big Boreas Chiller,
you see that the ATX 24pin needs a cut-out, and two tubing with a BP fitting,
also the Coolit Freezone V1 needs his place in this plate :


And here you see what also needs to be cutt-out in alu plate :

also with very small iron files i have to make the honey roster on another place :

This is epic. I am lost for words.

Incredible! 

Love it here as much as I did a few months ago on the other forum Beautiful work....

WOW!!

Guys, this man deserves a blue ribbon.

Here you go! Really amazing skills... (Link)

Outstanding work!!!!! Very impressed!!!

That's to wild for words dude!

Thanks all, new updates will follow with pics......

Update after some hours work :
the BP fittings are in place also the cutt-out for the ATX 24pin :

BP fittings close-up :

The outcome of the atx24pin :

Inside of the ATX24pin :


A Total overview with the motherboard and his power connectors installed for viewing cable routing :

CPU1 Close-up :

CPU0 Close-up :

ATX 24pin close-up :

ATX 24pin Close-up while motherboard is plugged in :

Total View ATX24 pin :

TOTAL overview mobo + atx connectors , alu plate :

Really amazing work m8! This really looks awesome, and I like your idea, although I don't like the design of the Level 10 Case.

What's with the plastic fittings?!
EDIT: Maybe you already explained that... but there's a LOT of content here.

the plastics fittings i use because :
 
i whant to use as less possible metal parts, because i have Hybrid cooling (TEC) and go very far sub-ambient on the liquid.
To prevent condensation as good as possible.
Also plastics will isolate a little bit better the cold in the liquid then the metal.
 
If i pay attention to every detail of insulation and stuff, at the end it will give me better temp, then if i put normal tubing and metal fittings.
 
I use also not normal tubing, but (industrial)  tubing that isolates also.

wow!!! .....
 
i like those elbow-shaped molex connectors

they are really good result, better then i expected lol.
 
But a pain in the ass to make them 

Aaahh... I get it. Going the extra mile to save yourself trouble later.

yes indeed.
 
if you use cooling like this, you should expect also condensation, just like i will be isolating the cpu sockets with armaflex.

 Incredible! Superb rig in every way.

thanks

...=0.....you ARE a god among men.....

Are you aware that you can also buy Armaflex isolation for your tubing? Because even with industrial tubing, I think you'll have condensation on the tubing, the water from the tubing will go to the CPU's, the SR-2 and the GTX 480's, and killing your hardware, cause even if you isolate very good, water standing on top of the Armaflex will get through, although it may take some time.

only cpu's and mobo will be cooled by these three coolers, GPU's on stock or aftermarket air coolers.
 
The tubing i use , i tested it before already, and they isolates VERY good. it's the same stuff Coolit uses stock to, but the tubing is thicker, and high grade material. there are different grades of isolation also.
 
Then about the condensation you say on top of the armaflex???
The temps i will have are not cold enough to get condensation ON the armaflex or in it.
 
Isolation means to make it airtight, because condensation is the moisture in the air atracted to the parts.
If i'm benching with Dice or ln2, then you see the condensation and freezing on the armaflex, but the temps i will have with this cooling is not cold enough to make condensation ON the armaflex or tubing.
 
Tested it al before also on a 980X + E759

Yes, I meant if the tubing doesn't isolate well, you will have condensation on the tubing, this will run down to the ends (chiller/CPU Blocks), and then you'll have some water there. But if the tubing isolates very good, it all should work fine. BTW how powerful is that chiller?

it's very powerfull.
 
with three coolers in loop, freezone elite, freezone V1 and a boreas in the same loop, i will have more then enough cooling power.

Sick stuff!  I saw your post on another forum and just fell in love with the work you do.
 
This should put you back on the boards @ HWBot!  Very nice.

This is amazing.
 
I wish i had the kind of time and money required to do this kind of stuff.
 
Mod on!

 
Looks simply amazing
If I could give your mods rig more than +1 I would.
 
How much time have you spent on this already?