Welcome !

xeon e-5645 over clocking 1st time run

Change Page: < 1 2 3 4 5 > | Showing page 3 of 5, messages 61 to 90 of 135

Author	Message

QatarMo

Total Posts : 34
Joined: 11/29/2010
Status: offline

Re:xeon e-5645 over clocking 1st time run Monday, March 19, 2012 6:52 PM (permalink)

muhd86

dry run for metro 2033 ---max setings ---res is as is ...

not sure but your avg fps is kinda low,,

Motherboard:EVGA Classified SR-2
Processors:2x Intel Xeon X5690
Memory:48GB Kingston HyperX (KHX1600C9D3T1BK6/24GX)
Graphics boards:2x ASUS ROG MARS II
CPU Coolers:2x Corsair Hydro Series H100
Case:HSPC HPTX Top Deck Deluxe Tech Station
Power supply:2x EVGA Classified SR-2
Hard drives:3x Intel 160 GB X25-M Raid-0
Monitor:XFX Triple Display Monitor Stand///3x Acer GD235HZbid
24/7 OC:180X25@4.5G 1.3v///10-10-10-29-T2@1800 1.65v

#61

TheWolf

Total Posts : 2617
Joined: 11/14/2007
Location: Pascagoula, Ms
Status: online
Ribbons: 7
Folding: 129,686,921

Re:xeon e-5645 over clocking 1st time run Monday, March 19, 2012 7:21 PM (permalink)

Is something wrong with the SR2 vcore voltage or is it just the ELEET program not reading right?
As you can see in the picture there different 1.27 and 1.26.
Both are set the same in bios I raised and lower, core1 always shows 1.26v.
Well I haven't gone over 1.28v yet, been no need to.

Folding@Home Newbie Lingo Guide

Folding@Home Guides

My HeatWare

#62

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Monday, March 19, 2012 9:31 PM (permalink)

QatarMo

muhd86

dry run for metro 2033 ---max setings ---res is as is ...

not sure but your avg fps is kinda low,,

brother please look closely at what res i have posted my score -----its over 4000 - 768

EVGA SR - 2 WITH DUAL XEONS E-5645 @ 3GHZ
48GB GSKILL RIPJAWS @ 1600 MHZ
4 - GTX-580 OC
SOUND BLASTER XIFI XTREME / THX EXTERNAL SOUND CARD
TRI XSPC RAD 360 WATER COOLED CPUS
4 * 1000GB HDD , 1 * 1000GB EXTERNAL HDD , 1 KINGSTON V200+ 128GB SSD
2 * RAPTORS RAIDO FOR BF3 DEDICATED 175GB , BLU RAY BURNER
AEROKOOL TOUCH 1000 FAN CONTROLER
EXTERNAL RADBOX FOR WATER COOLING WITH 18 LED LIT XIGMATIC XLF SERIES FANS
3 - 30 INCH DELL NVIDIA SURROUND DISPLAYS
XIGMATIC MODDED ELYSIUM CASING
1000WATT CORSAIR HX1000 PSU
1000WATT COOLER MASTER SILENT PRO PSU
THX 5.1 LOGITECH Z5500
CYBORG RAT 7 , BF

#63

QatarMo

Total Posts : 34
Joined: 11/29/2010
Status: offline

Re:xeon e-5645 over clocking 1st time run Tuesday, March 20, 2012 4:54 AM (permalink)

my bad,i was like whats wrong lol

#64

sbinh

Total Posts : 46
Joined: 5/1/2008
Status: offline

Re:xeon e-5645 over clocking 1st time run Tuesday, March 20, 2012 6:07 AM (permalink)

muhd86

whats volts u applying -- do u have latest bios --which mem u using with the rig --leave every thing at default / auto for now
increase block to e.g 170 - the multi is at 18 not 19 ---its 19 in turbo mode -

ur volts are low i am guessing --apply for now a min 1.325volts each and see if tis stable --if yes -lower untill its not

I followed Shamino's template .. and E5649 has multi 19.

#65

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Tuesday, March 20, 2012 12:46 PM (permalink)

no problem bro --we are all here to help out ...

would appreciate if u can run a similar benchmark at those setings .

#66

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Thursday, March 22, 2012 9:47 AM (permalink)

3DMark 11 video card benchmark test - top 20 results

THIS IS 3D MARK 2011 TOP XTREME RECORD HOLDERS --

WELL NOT BAD FOR A 2.7GHZ OCS ON THE CPU AND 930 ON THE GPUS ...LOLLL NOT BAD AT ALL .

#67

sbinh Total Posts : 46 Joined: 5/1/2008 Status: offline	Re:xeon e-5645 over clocking 1st time run Thursday, March 22, 2012 12:47 PM (permalink) muhd86 no problem bro --we are all here to help out ... would appreciate if u can run a similar benchmark at those setings . Thanks though. I don't run benchmark. I only run stability test before let it crunch F@H work units.
	#68

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Thursday, March 22, 2012 1:17 PM (permalink)

i wonder with a 4ghz over clock can i cross 9500 or touch 10000 xtreme ...

#69

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Tuesday, March 27, 2012 9:23 PM (permalink)

just raided 2 wd raptor drives --loll they were just lying around so i thought why not to use them in raid0 .

not bad i must say --better then the convential hdd atleast -
i wanted to know can i raid0 more then 2 drives of the same type will perfomrance increase further .

the raptors are 10,000 rpm 80gb models .

#70

TheWolf

Total Posts : 2617
Joined: 11/14/2007
Location: Pascagoula, Ms
Status: online
Ribbons: 7
Folding: 129,686,921

Re:xeon e-5645 over clocking 1st time run Wednesday, March 28, 2012 8:11 AM (permalink)

muhd86

just raided 2 wd raptor drives --loll they were just lying around so i thought why not to use them in raid0 .

not bad i must say --better then the convential hdd atleast -
i wanted to know can i raid0 more then 2 drives of the same type will perfomrance increase further .

the raptors are 10,000 rpm 80gb models .

Let me say 1st I don't raid, but my understanding is more the better perfomrance increase up to a point.
Four HDD should yield better results.

Folding@Home Newbie Lingo Guide

Folding@Home Guides

My HeatWare

#71

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Wednesday, March 28, 2012 9:21 PM (permalink)

yeah i am trying for 4 hdd lets see if i can get them today ..will post some results though .

#72

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Friday, March 30, 2012 1:10 PM (permalink)

well installed 2 old raptors ...this is what they do ...

not bad ...

#73

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Friday, April 06, 2012 10:10 AM (permalink)

wanted to know if i can get 350mb read / write if i add more raptors to the raid ..

#74

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Tuesday, April 10, 2012 10:01 PM (permalink)

can i get ove 350/400mb if i raid 4 raptors 10,000rpm drives ..

any one

#75

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Wednesday, April 11, 2012 10:50 AM (permalink)

#76

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Saturday, April 14, 2012 10:41 AM (permalink)

The Avenger | X8663 @ GTX 580 QUAD SLI| 930/18600/2130 | Intel XEONS DUAL E-5645 @ 2.7 GHz [QUAD SLI]

#77

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Tuesday, April 24, 2012 9:57 PM (permalink)

i want to get some info from senior members here regarding the uncore on the sr2 its alwas on auto .

if i want to over clock the board should i leave the uncore at auto or mannualy dial in some setings .

also the qpi speeds should i select the max or is that to be left at auto as well .

even if i leave the cpu at stock .

#78

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Sunday, April 29, 2012 10:32 PM (permalink)

a dry run with a small over clock ..though i am told the 64 bit version yields more score .

#79

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Monday, April 30, 2012 3:36 AM (permalink)

my rig is on guru3d rig of the month ----------yeahhhhh

http://www.guru3d.com/article/guru3d-rig-of-the-month--april-2012/

#80

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Monday, April 30, 2012 10:34 AM (permalink)

#81

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Saturday, May 05, 2012 2:56 PM (permalink)

added the evp module ...........do we get the new latest model for free

#82

new2019

Total Posts : 863
Joined: 11/1/2010
Status: offline

Re:xeon e-5645 over clocking 1st time run Sunday, May 06, 2012 8:11 PM (permalink)

IDK why my E5603 are overclock-able to 2.64Ghz from 1.6Ghz , without adjusting any voltages, bclk 220* 12 multi.
il post up a screenshot asap.
and I also reduced the qpi to slower mode.

>>>> EVGA SR2 << X5650<<<<X5650<<<<<6GB
CORSAIR DOMINATOR 1600 C8<<<<<1200W Thermaltake PSU <<<< VGA WANTED <<<< SSD WANTED <<<<<<<<
Heatware

#83

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Thursday, May 10, 2012 9:27 AM (permalink)

i am told that the evbot the new red model is free for sr 2 owners who did not get it the 1st time around

#84

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Thursday, May 24, 2012 10:21 AM (permalink)

Intel Dual Xeon E5645 @ 2.7 GHz | Resulting, KB/s : 10663

#85

scsi2man

Total Posts : 119
Joined: 12/22/2010
Status: offline

Re:xeon e-5645 over clocking 1st time run Thursday, May 24, 2012 2:59 PM (permalink)

Very nice, muhd86.

SuperMicro X9DAE, 128GB Crucial DDR3 1333 ECC Reg, 2 Geforce Titan in SLI, Areca 1882ix-24-4G, 6 Samsung 840 pro 256GB in raid 0, 10 WD RE4 2TB in raid 6, 12 Hitachi Ultrastar 4TB in raid 6, Enermax MAXRevo 1500 watt, Enermax MAXRevo 1350 watt, Dell U3011 30" display

#86

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Thursday, May 24, 2012 10:15 PM (permalink)

thanks will try to overclock to 3.8 / 4ghz and see what scores i get .

#87

muhd86

Total Posts : 278
Joined: 11/6/2010
Status: offline
Ribbons: 2

Re:xeon e-5645 over clocking 1st time run Tuesday, June 12, 2012 11:48 AM (permalink)

is cooling the sr2 with a water block a viable option and does it have any effect on over all performance of the mobo .

#88

Gratuitous Total Posts : 994 Joined: 3/16/2011 Location: California Status: offline Ribbons: 4 Folding: 7,062,084	Re:xeon e-5645 over clocking 1st time run Tuesday, June 12, 2012 3:34 PM (permalink) performance, negligible longevity under load, noise reduction and visual appeal, yes “I built a castle in the swamp and it sunk. I built a second castle and it sunk too. I built a third castle and it burned down and then sunk. But the fourth castle, Ahhhh! That one stood.” —Monty Python and the Holy Grail
	#89