My liquid cooling build [pics as parts arrive]

Change Page: < 123456 | Showing page 6 of 6, messages 151 to 177 of 177
Author Message
crazyg0od33

  • Total Posts : 1944
  • Joined: 2/1/2008
  • Status: offline
  • Ribbons: 6
Re:Brand new to Liquid Cooling, looking for some suggestions/tips Sunday, February 12, 2012 5:28 PM (permalink)
well I found this on another forum, from the end of last may:
from the guy behind the res. himself --
"1. Light tube leaking - We found this was actually caused by condensation, since the material was too soft, thermal barrier too weak, etc etc. We went back to using polycarbonate for this part, since we finally found a supplier who has it without a UV inhibitor."
System In Progress:


Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
  
Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
 
http://heatware.com/eval.php?id=79239
 
    crazyg0od33

    • Total Posts : 1944
    • Joined: 2/1/2008
    • Status: offline
    • Ribbons: 6
    Re:Brand new to Liquid Cooling, looking for some suggestions/tips Monday, February 13, 2012 5:28 AM (permalink)
    Black ice sr1 or xspc rx360?
    Come to the same amount after my credit.
    System In Progress:


    Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
      
    Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
     
    http://heatware.com/eval.php?id=79239
     
      EVGATech_DaveB

      • Total Posts : 2315
      • Joined: 9/26/2008
      • Status: offline
      • Ribbons: 24
      • Folding: 613,968
      Re:Brand new to Liquid Cooling, looking for some suggestions/tips Monday, February 13, 2012 6:38 AM (permalink)
      I would say SR1.  From what I have been seeing, for the same size (and unlike almost every review I have seen THE CORRECT FANS) its the only thing that stood up to the Monsta.
      One other thing to consider, Magicool, they are an OEM.  They have basically unbranded rads from BI, XSPC, Feser for 2/3 the price.
       
        crazyg0od33

        • Total Posts : 1944
        • Joined: 2/1/2008
        • Status: offline
        • Ribbons: 6
        Re:Brand new to Liquid Cooling, looking for some suggestions/tips Monday, February 13, 2012 7:12 AM (permalink)
        I have gentle typhoon AP-15 in push/pull if that makes a difference?
        System In Progress:


        Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
          
        Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
         
        http://heatware.com/eval.php?id=79239
         
          EVGATech_DaveB

          • Total Posts : 2315
          • Joined: 9/26/2008
          • Status: offline
          • Ribbons: 24
          • Folding: 613,968
          Re:Brand new to Liquid Cooling, looking for some suggestions/tips Monday, February 13, 2012 9:26 AM (permalink)
          The correct fans was actually a reference at the Monsta.  its a BEAST of a rad, but most of the time they are tested with crap fans, or at best a descent fan which is WAY too small for it.  Which in spite of its size, gave it VERY bad reviews.  So I made that as a caveat incase I got the Monsta's are only a name.... not that great.  SR1 is IMHO best non Monsta on the market, SR1 does nto carry the price tag, or the GIGANTIC form factor.
           
          For most everything NON-Monsta the AP15's are an excellent choice, IMHO, probably the best, at very least top 5 120x120x25 fans made.
           
            crazyg0od33

            • Total Posts : 1944
            • Joined: 2/1/2008
            • Status: offline
            • Ribbons: 6
            Re:Brand new to Liquid Cooling, looking for some suggestions/tips Monday, February 13, 2012 10:09 AM (permalink)
            Ok, thanks for the help.  The SR1 is a little thinner also, so I'll have a little more room for the 8-pin header
            System In Progress:


            Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
              
            Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
             
            http://heatware.com/eval.php?id=79239
             
              crazyg0od33

              • Total Posts : 1944
              • Joined: 2/1/2008
              • Status: offline
              • Ribbons: 6
              Re:Brand new to Liquid Cooling, looking for some suggestions/tips Monday, February 13, 2012 12:46 PM (permalink)
              Also my radiator came without screws (the one I got on forum) but the spec sheet says M4 screws, so do I get a certain length if I'm not using fans on it, or just some small ones to mount from the bottom to the case?
              System In Progress:


              Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                
              Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
               
              http://heatware.com/eval.php?id=79239
               
                EVGATech_DaveB

                • Total Posts : 2315
                • Joined: 9/26/2008
                • Status: offline
                • Ribbons: 24
                • Folding: 613,968
                Re:Brand new to Liquid Cooling, looking for some suggestions/tips Monday, February 13, 2012 12:53 PM (permalink)
                Really depends on the case.  If it has screw holes for mounting, 1/4-3/8 inch should be fine, unless there is a sizable recess in the m ounting area, remember, dont go too long, the last thing you want to do is thread a screw in too far, and puncture the radiator core.
                 
                  crazyg0od33

                  • Total Posts : 1944
                  • Joined: 2/1/2008
                  • Status: offline
                  • Ribbons: 6
                  Re:Brand new to Liquid Cooling, looking for some suggestions/tips Wednesday, February 15, 2012 12:26 PM (permalink)
                  *removed*
                  <message edited by crazyg0od33 on Wednesday, February 15, 2012 5:47 PM>
                  System In Progress:


                  Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                    
                  Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                   
                  http://heatware.com/eval.php?id=79239
                   
                    crazyg0od33

                    • Total Posts : 1944
                    • Joined: 2/1/2008
                    • Status: offline
                    • Ribbons: 6
                    Re:Brand new to Liquid Cooling, looking for some suggestions/tips Wednesday, February 15, 2012 5:38 PM (permalink)
                    How many radiators is too many?
                    I found a SR1 120mm on ebay for 40 shipped and I'm thinking of going with an SR1 30 and already have a 140 GTX, so would a 120mm be pointless? Also, are the NZXT 140mm fans strong enough for a black ice GTX push setup?
                    I also can get this over the weekend from local microcenter...
                    <message edited by crazyg0od33 on Wednesday, February 15, 2012 6:03 PM>
                    System In Progress:


                    Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                      
                    Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                     
                    http://heatware.com/eval.php?id=79239
                     
                      crazyg0od33

                      • Total Posts : 1944
                      • Joined: 2/1/2008
                      • Status: offline
                      • Ribbons: 6
                      Re:Brand new to Liquid Cooling, looking for some suggestions/tips Thursday, February 16, 2012 7:26 AM (permalink)
                      So Ivy Bridge has been delayed till "after june" apparently, so at microcenter I can get a 2500k for $180 new.  I think I may pick this up to use on a Z77 board as an "interim" CPU until Ivy bridge is released, and then sell this processor...what do you guys think?
                      System In Progress:


                      Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                        
                      Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                       
                      http://heatware.com/eval.php?id=79239
                       
                        JaskarnSidhu

                        • Total Posts : 770
                        • Joined: 6/2/2011
                        • Location: Edmonton, Alberta, Canada
                        • Status: offline
                        • Ribbons: 2
                        • Folding: 8,420,271
                        Re:Brand new to Liquid Cooling, looking for some suggestions/tips Thursday, February 16, 2012 10:37 AM (permalink)
                        If it was me I would save the money and wait or wait and put that money towards another rad and fans.



                         
                          crazyg0od33

                          • Total Posts : 1944
                          • Joined: 2/1/2008
                          • Status: offline
                          • Ribbons: 6
                          Re:Brand new to Liquid Cooling, looking for some suggestions/tips Thursday, February 16, 2012 11:25 AM (permalink)
                          Alright thanks. So you think a third rad is a worthy purchase?
                          System In Progress:


                          Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                            
                          Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                           
                          http://heatware.com/eval.php?id=79239
                           
                            JaskarnSidhu

                            • Total Posts : 770
                            • Joined: 6/2/2011
                            • Location: Edmonton, Alberta, Canada
                            • Status: offline
                            • Ribbons: 2
                            • Folding: 8,420,271
                            Re:Brand new to Liquid Cooling, looking for some suggestions/tips Thursday, February 16, 2012 12:29 PM (permalink)
                            Adding another rad will bring your temps closer to ambient under idle and load. The more rads you add the closer and closer you will be.



                             
                              crazyg0od33

                              • Total Posts : 1944
                              • Joined: 2/1/2008
                              • Status: offline
                              • Ribbons: 6
                              Re:Brand new to Liquid Cooling, looking for some suggestions/tips Thursday, February 16, 2012 12:42 PM (permalink)
                              cool, just got the 120mm for 40 shipped used (in perfect condition though  )  
                              Would a good order for this new setup be:
                              pump - 140mm - cpu - 120mm - gpu - 360mm - res - back to pump?
                              System In Progress:


                              Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                                
                              Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                               
                              http://heatware.com/eval.php?id=79239
                               
                                JaskarnSidhu

                                • Total Posts : 770
                                • Joined: 6/2/2011
                                • Location: Edmonton, Alberta, Canada
                                • Status: offline
                                • Ribbons: 2
                                • Folding: 8,420,271
                                Re:Brand new to Liquid Cooling, looking for some suggestions/tips Thursday, February 16, 2012 1:46 PM (permalink)
                                The coolant temp difference between your CPU and GPU will only be at MOST 2-3C. My recommendation would be res--->pump--->CPU--->GPU--->all three rads---> back to res.



                                 
                                  crazyg0od33

                                  • Total Posts : 1944
                                  • Joined: 2/1/2008
                                  • Status: offline
                                  • Ribbons: 6
                                  Re:Brand new to Liquid Cooling, looking for some suggestions/tips Friday, February 17, 2012 12:53 PM (permalink)
                                  Just managed to snag a Creative Fatal1ty soundcard for $50 on OCN forums 
                                   
                                  Yay!
                                  System In Progress:


                                  Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                                    
                                  Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                                   
                                  http://heatware.com/eval.php?id=79239
                                   
                                    crazyg0od33

                                    • Total Posts : 1944
                                    • Joined: 2/1/2008
                                    • Status: offline
                                    • Ribbons: 6
                                    Re:Brand new to Liquid Cooling, looking for some suggestions/tips Saturday, February 18, 2012 10:27 PM (permalink)
                                    Figured I'd post some pics now that I got my hands on some of my stuff:
                                     

                                    Attachment(s)Attachments are not available: Download requirements not met
                                    System In Progress:


                                    Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                                      
                                    Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                                     
                                    http://heatware.com/eval.php?id=79239
                                     
                                      JaskarnSidhu

                                      • Total Posts : 770
                                      • Joined: 6/2/2011
                                      • Location: Edmonton, Alberta, Canada
                                      • Status: offline
                                      • Ribbons: 2
                                      • Folding: 8,420,271
                                      Re:Brand new to Liquid Cooling, looking for some suggestions/tips Friday, February 24, 2012 11:22 AM (permalink)
                                      I love those comPression fittings. That is a good looking set up. How is it coming along? I'd like to see some more pics with the rads and everything all hooked up.



                                       
                                        crazyg0od33

                                        • Total Posts : 1944
                                        • Joined: 2/1/2008
                                        • Status: offline
                                        • Ribbons: 6
                                        Re:Brand new to Liquid Cooling, looking for some suggestions/tips Friday, February 24, 2012 12:55 PM (permalink)
                                        it's getting there, I have a while to go before the build can start as I'm still waiting on Ivy and I'm not actually home for a little while.  I'll be flushing the rads early march though when Im home
                                        System In Progress:


                                        Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                                          
                                        Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                                         
                                        http://heatware.com/eval.php?id=79239
                                         
                                          crazyg0od33

                                          • Total Posts : 1944
                                          • Joined: 2/1/2008
                                          • Status: offline
                                          • Ribbons: 6
                                          Re:Brand new to Liquid Cooling, looking for some suggestions/tips Wednesday, February 29, 2012 6:24 PM (permalink)
                                          These are my cables, from {uZa} DOA.  at least, its the same pattern I wanted:
                                          Red, White, White, Titanium Gray MDPX-X sleeving

                                          System In Progress:


                                          Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                                            
                                          Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                                           
                                          http://heatware.com/eval.php?id=79239
                                           
                                            crazyg0od33

                                            • Total Posts : 1944
                                            • Joined: 2/1/2008
                                            • Status: offline
                                            • Ribbons: 6
                                            Re:Brand new to Liquid Cooling, looking for some suggestions/tips Wednesday, February 29, 2012 8:21 PM (permalink)



                                            System In Progress:


                                            Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                                              
                                            Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                                             
                                            http://heatware.com/eval.php?id=79239
                                             
                                              crazyg0od33

                                              • Total Posts : 1944
                                              • Joined: 2/1/2008
                                              • Status: offline
                                              • Ribbons: 6
                                              Re:Brand new to Liquid Cooling, looking for some suggestions/tips Sunday, March 04, 2012 10:40 AM (permalink)
                                              hey, is the SR1 360 worth the ~$30 price difference over the RX360, or is the XSPC a better price/performance rad?
                                              Thanks
                                              System In Progress:


                                              Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                                                
                                              Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                                               
                                              http://heatware.com/eval.php?id=79239
                                               
                                                amuseme

                                                • Total Posts : 159
                                                • Joined: 1/14/2010
                                                • Location: Lloydminster, SK, CANADA
                                                • Status: offline
                                                • Ribbons: 1
                                                Re:Brand new to Liquid Cooling, looking for some suggestions/tips Sunday, March 11, 2012 6:42 PM (permalink)
                                                The SR1 has excellent build quality. Some of the best out there IMO. 


                                                 
                                                  crazyg0od33

                                                  • Total Posts : 1944
                                                  • Joined: 2/1/2008
                                                  • Status: offline
                                                  • Ribbons: 6
                                                  Re:Brand new to Liquid Cooling, looking for some suggestions/tips Sunday, March 11, 2012 7:03 PM (permalink)
                                                  well, I managed to find it on sale for $100 shipped brand spankin new!  So, for all you waiting on pics, I'm starting a build log next week when I'm home for break...I'll be test fitting my radiators/watercooling bits, etc.
                                                  System In Progress:


                                                  Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                                                    
                                                  Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                                                   
                                                  http://heatware.com/eval.php?id=79239
                                                   
                                                    crazyg0od33

                                                    • Total Posts : 1944
                                                    • Joined: 2/1/2008
                                                    • Status: offline
                                                    • Ribbons: 6
                                                    Re:Brand new to Liquid Cooling, looking for some suggestions/tips Saturday, March 31, 2012 11:42 AM (permalink)
                                                    been gone for a while.  BUILD LOG HERE
                                                    System In Progress:


                                                    Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                                                      
                                                    Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                                                     
                                                    http://heatware.com/eval.php?id=79239
                                                     
                                                      crazyg0od33

                                                      • Total Posts : 1944
                                                      • Joined: 2/1/2008
                                                      • Status: offline
                                                      • Ribbons: 6
                                                      Re:Brand new to Liquid Cooling, looking for some suggestions/tips Sunday, April 08, 2012 8:21 PM (permalink)
                                                      just preordered the EVGA Z77 FTW
                                                      System In Progress:


                                                      Asus Maximus IV Extreme // i5 2500k @ 4.8GHz // 2x EVGA GTX 580 Classified Hydro Copper in SLI // 16 GB Corsair Vengeance Black LP @ 1600MHz 1.5v // Samsung 830 120GB SSD // Seagate 2TB HDD // Creative X-Fi Fatal1ty // Corsair AX1200 //  NZXT Switch 810 White 
                                                        
                                                      Cooling: Black Ice SR1 360mm // XSPC EX240 Multiport 240mm // DT 5Noz CPU Block // Koolance PMP-450S Pump // Primochill Primoflex PRO 3/8" ID 5/8" OD White Tubing // FrozenQ Liquid Fusion Blood Red/White Reservoir // White Monsoon Compressions //
                                                       
                                                      http://heatware.com/eval.php?id=79239
                                                       
                                                        Change Page: < 123456 | Showing page 6 of 6, messages 151 to 177 of 177

                                                        Jump to:

                                                        Current active users

                                                        There are 0 members and 2 guests.

                                                        Icon Legend and Permission

                                                        • New Messages
                                                        • No New Messages
                                                        • Hot Topic w/ New Messages
                                                        • Hot Topic w/o New Messages
                                                        • Locked w/ New Messages
                                                        • Locked w/o New Messages
                                                        • Read Message
                                                        • Post New Thread
                                                        • Reply to message
                                                        • Post New Poll
                                                        • Submit Vote
                                                        • Post reward post
                                                        • Delete my own posts
                                                        • Delete my own threads
                                                        • Rate post

                                                        2000-2013 ASPPlayground.NET Forum Version 3.8