logan801


As far as bending the outsides in more you could take it to home depot and use their bender before you get caught.lol.

Hah!  They have one?
 
I was thinking about using something to bend it in more.  I also am considering getting some 27 inch monitors (2560x1440) and realized if I bent it in too far, nothing more than 25 inch monitors would work.  The more you bend, the less room you have for larger monitors up to 28 inches.  Right now, I have 3 inches on the end that I could move the monitor outwards. 

I need to buy one of these but I don't have all my monitors yet, do I need to worry about the price going up or them running out?

spitfire5792


I need to buy one of these but I don't have all my monitors yet, do I need to worry about the price going up or them running out?

You shouldn't have to worry. The price does fluctuate a little but generally it is in the same vicinity($5-$10). They seem to keep stock so far. They went out of stock when this thread first started due to the high flux of purchasers.

Alright cool, thanks!

Just ordered one!! What a deal. I'll post pics with my mishmash of dell u241Xx's when i get it. I plan on mounting it to a rolling laptop stand that i keep at the end of my chase.

look forward to seeing that setup

Should get the stand Thursday. I got everything else and tested 2d surround today. It works but not very well I get a little "but noticeable" video and mouse lag. :( any ideas? I'm running my i7.930@4.2ghz and sli680 the Rez is 5760X1200 is that too much for my rig? Fps bounce around the 20's in bf3 and crisis2.

i run 5760x1080 with SLI 580 3GB's. Perhaps you are hitting a VRAM cap and it is producing stutters? 
 
I usually stay above 40 fps with my 580's
 
i would suggest using high settings instead of ultra, i personally cant tell the difference. it really helps with the vram consumption. 

Just noticed my clocks are at 750mhz and VRAM is at 1900 something I'm puzzled. Never mind it started working properly i guess the drivers just had to warm up 0.o

Stay tuned more to come.

I bought the clamp-on one. I think the free standing one takes up too much desk space. The first pic is from a couple weeks ago. I now have most of the wire management done (second pic).

 

Im pretty happy with the stand. seems very sturdy, and it dosn't fall over which is a plus.

[tube]http://youtu.be/IMi5eHzu5Ww[/tube]

Glad i found this thread, been looking for a monitor stand and this one looks like a sweet deal. The only thing is i just wish it curved a little more. Im sure if i try hard enough i can find some way to make it work. 

Got my mount setup today.  THen find out i might have ruined the one monitor, hope i can figure out whats wrong with it soon as its preventig me from playing in eyefinity :( Only complaint i have is that the mount isn't curved enough which makes it hard to read text on the far left or right, but i tucked the 2 outer panels behind the middle one which helped a bit.
 
Anyways heres a pic of my setup

For those of you that want a curved triple monitor stand. I just picked up a "Triple Monitor Stand Free Standing Curved Arm" from Tyke Supply for only $106.35 shipped FedEx Home Delivery.
 
Since I can't post URLs:
Go to tykesupply(dot)com and look up "Triple Monitor Stand Free Standing Curved Arm" 

They have clamp version  as well for $10 cheaper but for my requirements that wouldn't work.
Will post images when it get here. 

~This post is approved by me!

Looks like the Tykesupply guys are selling the same thing EasyLCDMount is.. Just from looking at the pictures they look identical.

shazam


Looks like the Tykesupply guys are selling the same thing EasyLCDMount is.. Just from looking at the pictures they look identical.

agreed

I bought the clamp on version for $88.00 shipped and was not disappointed.

 

^  AWESOME

Thanks!

Amazon.com has them for only 110.69 shipped.  Im going to order one soon. Im so happy I watched a video about removing the bezel on my acer monitor and will try it out before i order the other two monitors.  http://www.youtube.com/watch?v=CXiWANFerug
 and I want to run mine in portrait mode instead of so wide.

 I just have to make sure that my GD235 stays together like the one in the video He did (X203w) as that is important.

 Amazon has the monitors for 249 so 500 for two more monitors, 110 for the mount, and then 300 for a used Gtx580 3 gig 1584AR
to be able to run in SLI mode and run the three monitors.

 I cant wait, hope my monitor comes apart nice like the one in the video above !!!!!!!!

 I also wonder about the curve in the mount, will it be enough to seem like surround ????
 
 
My 2 1/2 year old rig that I just upgraded the ssd drive and asus add on card.
 
CPU: Core i7 CPU 920 @ 2.67GHz
Speed : 2.67 GHZ (overclocked to 3.8 GHZ)
Motherboard: ASUS P6T DELUXE V2
Memory: 12 gigs of Corsair CM3X2G1600C9 2GB DIMM DDR3 PC3-12800U DDR3-1600
Video Card:  NVIDIA GTX 580 (1584) 3 gigs of mem
Hard drives: "2" WDC WD740ADFD-00NLR5 (74.4GB, SATA150, 3.5", 10000rpm, NCQ, 16MB Cache) : 69GB ( I have BF3 installed in a seperate partition by itself )
"1" WDC WD7500AADS-00L5B1 (750.2GB, SATA300, 3.5", NCQ, 32MB Cache) : 699GB
 Intel 520 Series Cherryville SSDSC2CW120A3K5 2.5" 120GB SATA III MLC Internal SS Drive
dvd:HL-DT-ST DVD-RAM GH20LP20 (ATA66, DVD+-RW, CD-RW, 2MB Cache)
Optiarc DVD RW AD-7170A (ATA66, DVD+-RW, CD-RW, 2MB Cache)
Case: Antec nine hundred two
X-fi XtremeGamer sound card
Creative Labs T7700 7.1 surround sound speaker system
Zalman 9900 LCD CPU cooler ******* at least im not running a stock cooler
Corsair TX850W Power Supply
Cyberpoint 850 AVR LED UP
Acer GD235 monitor  ( 120 hz for 3D, and only 1920 x 1080 )
Corsair M60 mouse
Razor Nostromo mini keyboard for BF3 and FPS
Asus USB3.0 and Sata6.0 add on card for upgrade.

http://s968.beta.photobuc...5_zpsefde66a2.jpg.html

 I just took my monitor apart and I cant remove the plastic, so now I have to search for three new monitors. I guess I will have to give up the 120 hz as they are too expensive. 

http://www.newegg.com/Pro...x?Item=N82E16824260055

 today only 599 delivered to my home for three.......????

 well I went on about 8 different forums asking about the monitors and
no one answered me back. I only had the one day to make up my mind.
 I bought them, and now just hope that they will be ok for 2D surround.

Thanks OP for the post, will look into it the next few weeks.  BTW, ctguy1955 did you get a look at Asus' VG248QE? In OC forum CallsignVega has debezeled them while also removing the AG coating and applying a glossy one.  Without a doubt the display would look even greater.

OP, thank you for this link, I have been searching for a good "affordable" triple stand for a while now. I was so close to buying the one that is linked to ErgoLcd in the Nvidia surround tutorial page, with telescoping wings, which would be nice. But for less than half the price, this stand is very nice. 100$ shipped and at my door the next day. I am elated.
 

Glad I found this. I'm about to order a third GTX 680 and another Asus VW246H and give surround a try and wasn't looking forward to spending $200-400 on a stand.

My easymountlcd stand is holding up great so far. It's the only one I recommend if someone is looking to do multiple displays.

Got everything set up, but I've only tried it with LoL so far, and it runs poorly. The game is distorted on the left and right monitors and apparently it's been this way for years. Only problem I'm having is I can't get the monitors to line up correctly. Made a few adjustments and got the monitors almost lined up perfectly. Probably done messing with it for now. Games look great, if they support the resolution or Widescreen Fixer works for the game. All in all, I'm happy with the purchase.