wrinvert

for giggle heres a super pi run i just did for a guy asking questions in the p67 forums.
5.5 anyone?

 
not that's what i call showoff! ;)

I still miss some batch numbers!.. to those of you whom has not reported back to me with batch numbers please do! 

well build u a AC unit onto your computer to get the sub zero temp's. Where the evap. is seting on the CPU.

shaneduce


well build u a AC unit onto your computer to get the sub zero temp's. Where the evap. is seting on the CPU.

huh?

here you go..
 
Don't mind the voltage. the motherboard is broken. i'm waiting on my p67 FTW to arrive so i can return this one. it's set to 1.58v and reads out through vcore points 1.59v.

IceMatroX


here you go..

Don't mind the voltage. the motherboard is broken. i'm waiting on my p67 FTW to arrive so i can return this one. it's set to 1.58v and reads out through vcore points 1.59v.
[picture]

i need link to bigger picture.. :).. hard to read the correct numbers in that small pic! ^^.. you can cut out those 4 readouts like i did in my screenpic or some of the other members did :).. 
 
and you need your evga member name in the notepad :)

IstBarP you know it might also be useful to denote what type of cooling each person is using. air/h2o/tec/ln2 Im just thinking that 5.0+ on air is alittle bit more impressive then say LN2.

wrinvert

IstBarP you know it might also be useful to denote what type of cooling each person is using. air/h2o/tec/ln2 Im just thinking that 5.0+ on air is alittle bit more impressive then say LN2.

 
thats correct.. but again.. you can get air coolers that cools just as much as lets say a H70 and so on.. dunno about H100 since i havn't seen temps from that yet :).. 

but maybe i should include that.. don't think any in here used LN2 yet :)..  

IstBarP

IceMatroX


here you go..

Don't mind the voltage. the motherboard is broken. i'm waiting on my p67 FTW to arrive so i can return this one. it's set to 1.58v and reads out through vcore points 1.59v.
[picture]

i need link to bigger picture.. :).. hard to read the correct numbers in that small pic! ^^.. you can cut out those 4 readouts like i did in my screenpic or some of the other members did :).. 

and you need your evga member name in the notepad :)

here is the pic

 
 
about the evga member name this was intended for another forum where my name is just MatroX but b/c of MatroX is not available on the evga forum it's IceMatroX here. if you really need IceMatroX in there i will run it again after i get my Evga p67 FTW board.
 
and wrinvert. i'm on water but i did manage to do 5.4ghz on air with the Noctua NHD-14

 nobody needs 5 GHZ
 
you made my day

IceMatroX

IstBarP

IceMatroX


here you go..

Don't mind the voltage. the motherboard is broken. i'm waiting on my p67 FTW to arrive so i can return this one. it's set to 1.58v and reads out through vcore points 1.59v.
[picture]

i need link to bigger picture.. :).. hard to read the correct numbers in that small pic! ^^.. you can cut out those 4 readouts like i did in my screenpic or some of the other members did :).. 

and you need your evga member name in the notepad :)

here is the pic
[picture]
about the evga member name this was intended for another forum where my name is just MatroX but b/c of MatroX is not available on the evga forum it's IceMatroX here. if you really need IceMatroX in there i will run it again after i get my Evga p67 FTW board.

and wrinvert. i'm on water but i did manage to do 5.4ghz on air with the Noctua NHD-14

pretty nice overclock!!! :).. 5.5 ghz is indeed pretty good!!.. even on water! :) and 5.4 ghz is even more impressive since air cooling! :)

that size was okay, but really, the requirements to enter was 15 min of linx! .. 
 
it is okay with the name though.. but since you make a new one anyways you might as well put in the evga forum name 

bugger82

nobody needs 5 GHZ
you made my day

 
depends on what you are doing actually.. for video encoding and decoding, it is pretty nice actually!!! .. it runs way faster!..

haha ok. 15min of linx mby not at 5.5ghz but i can do that on 5.4ghz
i'm running it @ 5.2ghz 24/7 it passes 15min of linx and 12hours of prime but i will post screens after i get my FTW board

IceMatroX


haha ok. 15min of linx mby not at 5.5ghz but i can do that on 5.4ghz
i'm running it @ 5.2ghz 24/7 it passes 15min of linx and 12hours of prime but i will post screens after i get my FTW board

sounds good! :).. always looking for new members! :D.. and pretty crazy with the 5.4 ghz!.. what voltages are you using? .. up there?.. 1.6-1.7v ish ?

IstBarP

IceMatroX


haha ok. 15min of linx mby not at 5.5ghz but i can do that on 5.4ghz
i'm running it @ 5.2ghz 24/7 it passes 15min of linx and 12hours of prime but i will post screens after i get my FTW board

sounds good! :).. always looking for new members! :D.. and pretty crazy with the 5.4 ghz!.. what voltages are you using? .. up there?.. 1.6-1.7v ish ?

1.56v if i remember correctly
 
i don't want to go above 1.62v

IceMatroX

IstBarP

IceMatroX


haha ok. 15min of linx mby not at 5.5ghz but i can do that on 5.4ghz
i'm running it @ 5.2ghz 24/7 it passes 15min of linx and 12hours of prime but i will post screens after i get my FTW board

sounds good! :).. always looking for new members! :D.. and pretty crazy with the 5.4 ghz!.. what voltages are you using? .. up there?.. 1.6-1.7v ish ?

1.56v if i remember correctly

i don't want to go above 1.62v

so 1.56 at 5.5 ghz!?!.. that is pretty nice!.. don't think i'll ever manage to get up there! ^^.. 

I think I'm in too! 
 

Multi: 50x
BCLK: 99.8Mhz
vcore: 1.450v in bios.
All powersaving and speedstep disabled.
Without vdroop
 
Batch: L118B527
Cooler: Corsair H60- with single fan in pull.

A very cool thread!!  I wont be joining it sadly but I would just like to share this result below:
 
http://valid.canardpc.com/show_oc.php?id=1024291
 

 
My friend and I doing tests with my 759 + 920 D0 and a single stage :)  I think it would go more but need some better cooling than that :)
I have a few more screen shots of it past 5Ghz, I'll try and dig them out :)

i cant find the CPU box for the batch number sorry BOS

hey all! :)...
 
i have decided that we need some cooling info and therefor i have tried to PM those people that have the "cooling asked" under their names! :).. 
 
and to eyesonly_dk
Glad to have you here (i have been waiting ! ;)).. 

IstBarP


hey all! :)...

i have decided that we need some cooling info and therefor i have tried to PM those people that have the "cooling asked" under their names! :).. 

and to eyesonly_dk
Glad to have you here (i have been waiting ! ;)).. 

Thank you :) I couldn't quite match your awesome chip, I simply maxed the temps when trying for 5,1. had to go to a vcore of 1,5v to get it bootable, but then temps rose quite high, and I chickened out :P
 
btw, I forgot to tell my vcore on the 4,99Ghz clock. that was at 1,450v in the bios.

Eyesonly_dk

IstBarP

hey all! :)...

i have decided that we need some cooling info and therefor i have tried to PM those people that have the "cooling asked" under their names! :).. 

and to eyesonly_dk
Glad to have you here (i have been waiting ! ;)).. 

Thank you :) I couldn't quite match your awesome chip, I simply maxed the temps when trying for 5,1. had to go to a vcore of 1,5v to get it bootable, but then temps rose quite high, and I chickened out :P

btw, I forgot to tell my vcore on the 4,99Ghz clock. that was at 1,450v in the bios.

thanks! :).. i guess it is a bit awesome, but still quite high temps! :P.. i can easily get it 5.2 bootable, and even run windows, but linx will get me above 90 degrees celcius! :/.. and when it got to 90 i turned off computer,, won't go that far!  :)

IstBarP

Eyesonly_dk

IstBarP

hey all! :)...

i have decided that we need some cooling info and therefor i have tried to PM those people that have the "cooling asked" under their names! :).. 

and to eyesonly_dk
Glad to have you here (i have been waiting ! ;)).. 

Thank you :) I couldn't quite match your awesome chip, I simply maxed the temps when trying for 5,1. had to go to a vcore of 1,5v to get it bootable, but then temps rose quite high, and I chickened out :P

btw, I forgot to tell my vcore on the 4,99Ghz clock. that was at 1,450v in the bios.

thanks! :).. i guess it is a bit awesome, but still quite high temps! :P.. i can easily get it 5.2 bootable, and even run windows, but linx will get me above 90 degrees celcius! :/.. and when it got to 90 i turned off computer,, won't go that far!  :)

hehe, My just BSOD whenever I stayed above 91c :P which is nice. It's good to now the safety features work correctly.
This overclocking and benchmarking is dangerous. I didn't think I would got as caught in it as I am. In the P67 subforum, warlord420 had this to say about overclocking:
 

warlord420

follow these steps: 
I) OVERCLOCK, 
hit barrier/freak out from temps 

II) Get better cooling 
OVERCLOCK 
  
(hit the barrier) 
CRY yourself to sleep 

 
And it is so true

Eyesonly_dk

warlord420

follow these steps: 
I) OVERCLOCK, 
hit barrier/freak out from temps 

II) Get better cooling 
OVERCLOCK 

(hit the barrier) 
CRY yourself to sleep 

And it is so true

 
indeed true! :).. shame my H60 can't follow up on the heat :(

Well I am running mine at 5ghz no problem guess I am going to have to rebench with Linx as I don't use that and make a notepad screenshot.  Check my signature and 3Dmark11 till I have some time to run Linx.  Glad you made this club.

odinlives


Well I am running mine at 5ghz no problem guess I am going to have to rebench with Linx as I don't use that and make a notepad screenshot.  Check my signature and 3Dmark11 till I have some time to run Linx.  Glad you made this club.

you should get your rig up and running on modsrigs.. from what i can see it sounds like a pretty decent system! :)...
 
looking forward to see a screenshot! :D.

Very very nice OC's I'm jealous,  I don't think there is anyway my Phenom II X6 1100T BE will make that kind of an OC lol.  3.3GHz stock but i'm only running Asetek 510 LC for cooling (for now) but definately a great thread and a lot of good reads.

Bullryder13


Very very nice OC's I'm jealous,  I don't think there is anyway my Phenom II X6 1100T BE will make that kind of an OC lol.  3.3GHz stock but i'm only running Asetek 510 LC for cooling (for now) but definately a great thread and a lot of good reads.

thanks! :).. yea it is a nice thread indeed! :)
 
btw, my i5 2500k is running 5.1, and it is 3.3 ghz stock like yours ;D
but yea.. i don't think the amd will run that high :P

Once I get off of work I will go home and try for 5Ghz, I'm at a stable 4.8Ghz right now but my VCore is at 1.4v.... Temps are starting to hit 80 C.... The only way I'm doing this is if I get something cool to put in my signature like all the X58 guys do!

whitnasty1


Once I get off of work I will go home and try for 5Ghz, I'm at a stable 4.8Ghz right now but my VCore is at 1.4v.... Temps are starting to hit 80 C.... The only way I'm doing this is if I get something cool to put in my signature like all the X58 guys do!

 
our badge at the moment 

 

IstBarP

whitnasty1


Once I get off of work I will go home and try for 5Ghz, I'm at a stable 4.8Ghz right now but my VCore is at 1.4v.... Temps are starting to hit 80 C.... The only way I'm doing this is if I get something cool to put in my signature like all the X58 guys do!

our badge at the moment 

 
Looks good.
I suggest having people run the AVX version of LinX since the normal LinX doens't cut it anymore. The normal LinX doesn't fully stress the SB platform like Prime95 or LinX with AVX.