No Temps? Here´s a temporary Solution by Unwinder

This solution was posted by Unwinder in the old forums:

That's an internal issue of all currently available 190.xx series.

Problem background:
Since 190.xx series NVIDIA driver's internal resource manager is trying to precache thermal sensors information in the registry during the first startup after installation. This mechanism doesn't seem to work fine yet, under some conditions sensor detection and precaching algorithm can fail and store incorrect sensor type information in the registry causing temperatures to disappear till the ForceWare re-installation.

Temporary solution:

Until the problem is not fixed by NVIDIA, there are still some temporary tricks allowing to solve it. First, you may just perform complete Foreware re-install, this will also cause precached thermal sensor information to be removed from the registry and to be re-detected by ForceWare on the next start. Second, you may manually remove corrupted thermal sensor information from the registry and this way cause the ForceWare to re-detect it on the next reboot. To do it open regedit then search and delete all instances of RmThermalProviderInfo and RmThermalProviderNum entries in the registry. Then reboot.

And let's hope that it won't take long time to fix it from NVIDIA side.

Hey! Why so serious?
 

 
 

Nice. going to sticky 

EVGA Forums Moderator   
Disclaimer: My post are based on my own opinion  

Great advise,   though just using one or the other steps didn't quite work out well for me. 

made a copy of my Registry! Uninstalled the Nvidia Drivers and deleted the Nvidia folder, uninstalled Precision and did not keep the settings file it asked to save. Run - Regedit and looked for the above lines WildDog mentioned and found 2 instances, the "Info" and "Run" and deleted the lines. 

Rebooted, Installed the Nvidia Beta Driver 195.39 followed by Precision 1.81 but not have Precision start automatic as this might conflict with the Nvidia Driver and give you the BSOD with the remarks "nvlddmkm.sys" as it was in my case. I now see my GPU and PCB temp. 

Thank you WildDog, i can now get back to Folding and Gaming.. 


Wish List **
FTW Classified
GTX 285 Classified SLI
Koolance v2.5 External Watercooling
16GB Raptor 1336mhz Ram
Babysitter so i can have time to build it...

no worries mate, glad it worked for you but Credits are for Unwinder ;D

cheers

Hey! Why so serious?
 

 
 

i got same problem :D but the trick above it's work for me :X thanks n cheers !

Thanks, regedit worked.

will try this later today thank you

I visited the forums today just for this.
Thanks for the solution!