Please fix mobile GPU performance while using EVGA Precision X please :(. The interface is very laggy and the software is not usable on mobile GPUs such as the GT550m and GT555m.
 
See Here
 
It has almost been a month now and a lot off mobile gamers that want to use your program can't :(.
 
Also, yes I do have a an EVGA GTX 570 desktop GPU that i have registered to my account, so I do buy your products as well. It would just be good for the software's reputation to fix this.
 

Any news on mobile GPU performance issues?

the fan speed % (numerical value) is not being updated in real time properly, there is a severe delay UNLESS u have it in focus
the fan speed graph however seems to be working as intended

FYI.

• Going into Precision, selecting "Test", I stall have the OC Scanner black and th FPS is frozen.
• If I start the OC Scanner on its own, FPS floats and NV-Z will open, however I am still not able to get the clocking info on the 680 in the NV-Z

Why is everything white, like the graphs and slide bars?  I think important stuff should be distinguished from the rest by coloring it red or green.  All the variables should stand out more.  They look like part of the background image.

SirWaWa


the fan speed % (numerical value) is not being updated in real time properly, there is a severe delay UNLESS u have it in focus
the fan speed graph however seems to be working as intended

+1
I have certainly noticed this as well, and it is somewhat annoying.
It would be nice to have it udpate properly even when not in focus.

d.burnette

SirWaWa


the fan speed % (numerical value) is not being updated in real time properly, there is a severe delay UNLESS u have it in focus
the fan speed graph however seems to be working as intended

+1
I have certainly noticed this as well, and it is somewhat annoying.
It would be nice to have it udpate properly even when not in focus.

I swear it did not do this before...
I just noticed recently

What happened to the Shader Clock setting? 
 
Nevermind I found out it's automatic now 

jpclyde

What happened to the Shader Clock setting? 

 
Starting with the GeForce 600 series, a few changes have been made to the clock speeds while the Shader clock has been removed entirely. Instead, everything now runs off the core clock, which now also features what Nvidia calls a "Boost Clock," a akin to Intel’s Turbo Boost. 

also the evga E on the side for the manual fan control, doesn't update in realtime
once in focus or given enough time to pass it will update

This version causes some of my games to crash either on load or shortly after starting to play. I have a GTX 680 SC+ card and this is unacceptable!!!!

Causing issues with me too  with latest  Beta driver

do you have to apply clock every time you start your window ? i tried overclock but then it kept reverting back to original speed after i restart my computer.

Could u fix bug with Precision X 3.0.2
 
I've never had it on version 2.x
 
so I OC the card GTX 570 SC (1572 model)... So leaving 870Mhz by core clock, 2000Mhz for memory and voltage 1.088. So when I restart my PC core clocks come to default 797Mhz and not 870Mhz. It needs to set it up manually to 870Mhz everytime I restart PC. I even tested it with frsh install of new OS, so it's definetly a bug with Precision X...

LocTran


do you have to apply clock every time you start your window ? i tried overclock but then it kept reverting back to original speed after i restart my computer.

I do not believe you should have to.
Do not use the " windows start up" box on the Precision skin, I believe it is broken and does not work.
I believe you will need to check to run on windows startup on the general tab in the options menu.

im not having any luck trying to up the core volts on my 580 classified. 
can someone that has figured it out please chime in in one post so i can get to 1000MHz. i shouldnt need much because 955 scans with only one artifact but 3dmark11 will not finish.
i have tried with driver 296.10 and every one through the current 301.40 beta.
the card is in oc mode with the little switch.
thx
 

Yup that helps..lol...ty

Havin problems with screen capture not working and since it didnt work, I tried to get rid of Display server icon in notification area and it wont. I found all the check's, start minimized ect. and i just comes back when I close. runnin 301.24 driver and your new Precision X and OC scanner, Thx in advance, I just got my 560's and I'm in luv..lol I replaced my trusty 9800's so I know capture worked cause I used with old precision software. It's not killin me right now but I did use it. Kept me from havin to use fraps, win7 64 screen capture doesnt work with game.

Sorry I just read in precision read me notes that screen capture isnt supported yet with 64 bit...wierd tho because the old precision leagacy worked? Thx

EVGA_JacobF


Let me check.

I know there are several issues to deal with, yet I was wondering if attention to something like a resizable properties window is still a consideration for Precision. Hope so. It would sure help out those of us with wide screen monitors.

It seems the latest WHQL 301.42 drivers are causing the same old startup issues again (GPU offsets are being ignored, memory offsets work just fine).

No probs here on 301.42

Whoops, bit of a mistake on my part. Recently rebuilt the system and reinstalled Precision X without the Voltage Tuner fix, so I was getting the old issue again.

New version coming any time soon?

voltage tuner fix? where is this?

EVGA_JacobF

pcvdbroek


Voltage can still not be saved. I need slight overvolt for my card to be stable. So back once again to MSI afterburner.... sigh...

Hit the apply at Windows startup.

That doesn't help me.  I need the voltage increase when I overclock, don't want it pumping more hot air into my case when I am just cruising the 'net or doing work.  Just want the overvolt to occur when I overclock the card for gaming.  On that note, the profiles for 2D/3D aren't working for me either.  I have card default setup as a profile for 2D and my overclocked profile for 3D.  It's not correctly detecting when I go from 2D to 3D and has overclocked/overvolted profile "always on."

EVGA_JacobF


Found the solution for multi-GPU, sorry this was not clear.

Right click in the voltage tuning Window. This will allow you to select the GPU that you want to change the voltage for.

If you mean this:
 

 
The little window - nothing happens when I try to right click. I can't change the ovltages on any of the 3 GTX 560 Ti's, only teh GTX 580 (1st card).

Hello everyone,
 
I'm afraid that the voltage issue is not solved! re-downloaded EVGA precision X 3.02 today, still the voltage keeps resetting after each reboot. On top of that, even if Overclock my EVGA GTX 580 in the Precision X software, once I launch a game and toggle the On Screen Display, it shows the default Clock Speeds instead of the OC clocks. Plus, BF3 & Crysis 2 keep crashing (the display get black, loses connection to the input source or driver hangup). So yeah can't OC my card, on default clock there are no issues. Thing is I used to Run with My OC GTX 580 just fine some months ago. This has been going for 10 days and I can't fix it no matter how much I tweak, uninstall & reinstall.  I'm loyal To EVGA but now I'm fed up with it.
 
Sadly, I think I will switch to MSI afterburnner...
 
I have the latest Nvidia drivers 301.42

wont save voltage settings after reboot i tried everything....

Per Jacob -
 
For those of you experiencing the problem with the GPU Offset getting reset after Windows rest, please use the following workaround for now: 

Download the following file: 
ftp://ftp.evga.com/utilities/EVGAVoltageTuner.zip 
  
Extract to your Precision\Bundle\EVGAVoltageTuner directory, default path is: C:\Program Files (x86)\EVGA Precision X\Bundle\EVGAVoltageTuner 
  
Overwrite the existing file. 

Just a suggestion but how about the normal speed and boost speed markers change when you adjust the settings? So it shows you exactly what speeds you have clocked to.