I'm having the issue with the ocscanner black screen mentioned above, on both 3.01 and 3.02. Also the gpu offset reset problem on 3.02.

EVGA_JacobF

bluvert89

EVGA_JacobF


Yup, check my post on first page! Short answer is that it doesnt work with Classified yet, but there is a workaround.

The work around doesn't seem to work either though..

Need more details please, this is the same method we have been using for 680 Classified for many months.

 
Doesn't give the option to adjust NV VDD.  Or do the cards still have to be switched to "OC" in order for this option to appear?

bluvert89

EVGA_JacobF

bluvert89

EVGA_JacobF


Yup, check my post on first page! Short answer is that it doesnt work with Classified yet, but there is a workaround.

The work around doesn't seem to work either though..

Need more details please, this is the same method we have been using for 680 Classified for many months.

Doesn't give the option to adjust NV VDD.  Or do the cards still have to be switched to "OC" in order for this option to appear?

Yea, you have to have OC button on to have NV VDD or whatever not greyed out.

EVGA_JacobF

bluvert89

EVGA_JacobF


Yup, check my post on first page! Short answer is that it doesnt work with Classified yet, but there is a workaround.

The work around doesn't seem to work either though..

Need more details please, this is the same method we have been using for 680 Classified for many months.

3.0.2 is broken, OC doesnt stick.
 
http://www.evga.com/forums/tm.aspx?m=1545427
 
 

QuickShow


Voltage adjustment failed on triple SLI - only one of the three cards can be adjusted.

 
same problem with2-way SLI, only the first card gets adjustment in SYNC ON mode, the second stays at default.
 
with SYNC OFF there is no voltage adjustment applied to second GPU at all.
 
EVGA, patch it up please ... oh and if possible please make the saved profiles also remember the voltage setting, that would be sweet and easy to quickly switch OC profiles along with voltages for each GPU
 
EDIT:

EVGA_JacobF


Found the solution for multi-GPU, sorry this was not clear.

Right click in the voltage tuning Window. This will allow you to select the GPU that you want to change the voltage for.

 
will try that workaround, missed it the first time I browsed through.
 
EDIT:
it works, thanks!

Is there a way to revert to the old look?

I seem to be having trouble since I installed 3.02.  I keep getting the BSOD I've reverted back to 3.01 but it's still happening, everything was great until I update precision.

For those of you experiencing the problem with the GPU Offset getting reset after Windows rest, please use the following workaround for now:

Download the following file:
ftp://ftp.evga.com/utilities/EVGAVoltageTuner.zip
 
Extract to your Precision\Bundle\EVGAVoltageTuner directory, default path is: C:\Program Files (x86)\EVGA Precision X\Bundle\EVGAVoltageTuner
 
Overwrite the existing file.

Thanks, Jacob. I'll be trying this out later.

Its working for me, thanks Jacob.

Nice, it works! Thank's!
Just one more thing to be 100% satisfied: Could you please add german language?

Is there a way to resize the properties window? I can just reach the tabs even though I can't read them, and only if I autohide the taskbar can I click the OK or Cancel buttons. Way too tall.
 
Unless I missed something?

I'm having the same problem! The properties window is waaaay to tall for my resolution.

I did forget to mention that I have my Windows text size set to 150% (using TV as monitor) and this isn't a problem if I set the text size down, yet this makes all the other text unreadable. Not a show-stopper, just an inconvenience.

Same here

Let me check.

dude i love your **** bro... matches my 590s in my red themed case
 

Hi Guys
i hope this is the right Thread.
When I start my Precision X on PC i get an Error Message from the
EVGA Bluetooth Server:
bind() call failed w/socket = [0xE4] During a socket operation wasthe network inactive.
My Handy (Galaxy Note) is connected with the PC and the App on it say the same. In the Bluetooth Programm is the PC connected with the Handy, too.
I hope you can help me.
ThX, FreakHL 

I like the new Classified skin.  

Hi,
 
This new version locks up my windows 7, as soon as I type my password and press enter (ie. log on).
The first time it happened; the whole screen became green.
The second boot: desktop froze with usual background + icons.
Third boot: multiple colours flickering at the edges of icons and text, computer slowing down drastically.
 
How I managed to be able to use my computer again: One the third boot just as the colours were flickering, I CTRL + ALT + DELETE and shut down precision x. Computer has been stable and no issues. 
 
The previous version did not cause any of the above mentioned issues.
I will not be installing any software from evga again from now. I just posted this so the devs could perhaps identify something and make it work for people who like this software.
 
GTX460 SC 1024MB
 

     Jacob, just wanted to chime in, the frame limiter on this version and later seems to be broken when I turn it on it causes FPS to stutter (not smooth) or not work at all, been reading around the forums to find any clues and read were one user said to use the MSI frame limiter instead of the FPS limiter found in Precision 3.0.1 or 2...  I really was shocked when I enabled MSI frame limiter and Darksiders ran so smooth now, can you check on this or any one else confirm my finding.

Please fix mobile GPU performance while using EVGA Precision X please :(. The interface is very laggy and the software is not usable on mobile GPUs such as the GT550m and GT555m.
 
See Here
 
It has almost been a month now and a lot off mobile gamers that want to use your program can't :(.
 
Also, yes I do have a an EVGA GTX 570 desktop GPU that i have registered to my account, so I do buy your products as well. It would just be good for the software's reputation to fix this.

hi im downloading the new  but the while im downloading the software the downloading rate slows down..... and i can even open it anymore bcoz the downloading state is unfinish T^T pls help!

how do u change the color of the font during in-game monitoring?
 
for multi gpu setups when u change gpu's on the left side, the bottom graphs should change respectively
it's always showing gpu 1, where for some reason my PC likes gpu 2 = gpu 1 and gpu 1 = gpu 2
gpu 2 is really my primary/default gpu
despite my rare inconsistency with things this really makes more sense
please look into this
i don't want a mess of window graphs everywhere and if u don't have a second or third monitor to span(m) these around
 
also is the "tachometer" max a pre-determined max setting to accommodate gtx680's?

SirWaWa


how do u change the color of the font during in-game monitoring? 

Open precision, go to settings, open the monitoring tab, bottom right you'll see a coloured box across from "show in tray icon", click the coloured box, pick your colour. No, you don't have to check the tray icon box unless you want the tray icon, the onscreen display will change to your choice of colour.

shows white in the OSD
the tray does show blue, changed from red

Sorry dude, just doing that off the top of my head, I was on my laptop out in the garage, no Precision on that, on my main system now. 
 
Open Precision, click the OSD tab, bottom right click "More", bottom right of OSD server click the colour pallette button, pick your colour.
 
Sorry man, my bad, hard to remember when I'm not looking at the program.

dhemke


Sorry dude, just doing that off the top of my head, I was on my laptop out in the garage, no Precision on that, on my main system now. 

Open Precision, click the OSD tab, bottom right click "More", bottom right of OSD server click the colour pallette button, pick your colour.

Sorry man, my bad, hard to remember when I'm not looking at the program.

so thats where they hid it now
thanks!!!

I really miss being able to see the Temps for both cards at the same time on the normal screen.