OK, I am back up and running!!!

Re:OK, I am back up and running!!! (barnhartmd051977)

Sat, 07 Nov 2009 08:15:51 GMT

Re:OK, I am back up and running!!! (tank1023)

Sat, 07 Nov 2009 07:42:20 GMT

wb488641

tank1023

Don't forget to change your machine ID numbers.
I think they default as machine 2. Go in and change the 1-2-3. I spent a month folding with all the same machine ID and couldn't figure out why my PPD wasn't adding up. _Nite_ helped me on this one.

I already did that for him, just make sure to change the ID name, otherwise he will be folding with my name instead...

which would not be good for his PPD , but great for my PPD

WB

I was talking about machine ID's...
They are numbered 1-13 I think but they default at 2.

Re:OK, I am back up and running!!! (barnhartmd051977)

Sat, 07 Nov 2009 07:07:14 GMT

Hey lets see a pic of that... I bet that is a rats nest!!!! It would be a good laugh right about now!!!

Re:OK, I am back up and running!!! (barnhartmd051977)

Sat, 07 Nov 2009 07:05:48 GMT

I have to look around to see what for cables I have....

Re:OK, I am back up and running!!! (Torell)

Sat, 07 Nov 2009 06:59:40 GMT

I tried to make dummy plugs for my 280's & 285's and I picked up the wrong type of resisters. so the plugs never worked for me. This is what I did to get the 3rd card to work. I have 4 VGA/DVI adapters and two spare VGA cables and ran the VGA cable (with the VGA/DVI adapters connected to each end) from plug 1 on card two to plug 1 on card three.. and Boom!! working.. (yeah I know its kinda messy but it works) I can get a screen shot if you all want a chuckle.

Re:OK, I am back up and running!!! (barnhartmd051977)

Sat, 07 Nov 2009 06:09:22 GMT

OK great I have called both my local stores and have had them search the shelves, NO GO... One store just called me back, the guy has check the inventory of every store from Kittery MAINE to Boston Mass to Burlington VT, Not one Store has 271-1106 in stock..

Wow guess I will wait for the seven to 10 days it will take him to get them in

Re:OK, I am back up and running!!! (barnhartmd051977)

Sat, 07 Nov 2009 05:57:08 GMT

10 am the store closes at 12 on sat's what kind crap is that, who in there right mind works a two hour shift on a sat...

Re:OK, I am back up and running!!! (FlipBack)

Sat, 07 Nov 2009 05:49:20 GMT

Yeah, 10AM here as well.

Re:OK, I am back up and running!!! (leftygof)

Sat, 07 Nov 2009 05:46:24 GMT

They open at 10 here....thats where I got my resistors and they should have the plugs also.

They are literally like .15 a piece for the resistors

Re:OK, I am back up and running!!! (barnhartmd051977)

Sat, 07 Nov 2009 05:16:13 GMT

What time does radio shack open on Sat, I have called my local store and the phone just keep on ringing... i guess i will wait untill 9am

Re:OK, I am back up and running!!! (barnhartmd051977)

Sat, 07 Nov 2009 04:37:59 GMT

I got everything changed, but when I try to do it with SLI enabled it ramps up 2 cards with one client and then will not let me open any other clients... So either way I do it card thre just sits there and looks pretty....

Re:OK, I am back up and running!!! (wb488641)

Sat, 07 Nov 2009 00:33:43 GMT

tank1023

Don't forget to change your machine ID numbers.
I think they default as machine 2. Go in and change the 1-2-3. I spent a month folding with all the same machine ID and couldn't figure out why my PPD wasn't adding up. _Nite_ helped me on this one.

I already did that for him, just make sure to change the ID name, otherwise he will be folding with my name instead...

which would not be good for his PPD , but great for my PPD

WB

Re:OK, I am back up and running!!! (tank1023)

Sat, 07 Nov 2009 00:27:44 GMT

Don't forget to change your machine ID numbers.
I think they default as machine 2. Go in and change the 1-2-3. I spent a month folding with all the same machine ID and couldn't figure out why my PPD wasn't adding up. _Nite_ helped me on this one.

Re:OK, I am back up and running!!! (wb488641)

Sat, 07 Nov 2009 00:17:12 GMT

Hey Barn, you are welcome!!!

do what the squirrel suggested , enabled SLI and using driver 191.07 and above, then you don't need the dummy plugs, if you have sli enabled, otherwise you will need dumb plugs

Good Luck on your installed, as myself is busy trying to keep the farm running with anymore

WB

Re:OK, I am back up and running!!! (69vettester)

Fri, 06 Nov 2009 20:38:36 GMT

I was surprised you missed this, You were Probably anxious to get started.

Quote/
Get er Done and Get back soon. One thing at a Time Do lots of research first . All the Folding On Multiple GPU's is On the archive forum.
If your using 191.07 drivers and your 260's are single , you can skip the dummy Plugs. If they are duals Like the gtx275's the dummys are necessary. The dummys are easy to make, after you get the 6+ resistors from radio shack you cab make them in 5-10 mins.
Keep us posted? /quote

Re:OK, I am back up and running!!! (69vettester)

Fri, 06 Nov 2009 20:24:18 GMT

barnhartmd051977

Well, I got my CM V8 repaired, and its working... I also got the three GTX 260 SSC's installed... I can only fold on two of them as of right now... I thought the new drivers allowed you to fold without dummy plugs, WRONG!!! 191.07 u need dummy plugs!!! I am folding GPU 1 wint my Samsung Monitor, and Folding on GPU 2 using my Sony 40 TV, and GPU 3 has nothing... So I am at least running 2 of 3 GPUs, and 8 cores on my i7, no -bigadv for me yet I will wait for u guys to get all the bugs worked out...

I would also like to thank tank 1023, wb488641, Horvat, and everyone else that helped me get through this!!!

Barnhardt Ill be right back with a quote from over at your original post on the archive. 2 Mins Please.

Re:OK, I am back up and running!!! (Shift.Evolve)

Fri, 06 Nov 2009 19:55:17 GMT

If you have a DVI -> VGA adapter just grab some resistors and you can make an easy one.

THIS is the guide I used. I just put some hot glue on and around the resistors to make sure they stay in place incase I bump it. The 5 resistors only cost $1 at Radio Shack.

Re:OK, I am back up and running!!! (barnhartmd051977)

Fri, 06 Nov 2009 18:17:46 GMT

I did kinda like it running in SLI, but it was kinda funny... I had one GPU client open and it fired up GPU 1 & 2 to 3d mode and it started a 1888 it was doing 1% one min then 2% the next min, it alternated like that in 10 to 15 mins it was at 25% or more... But GPU 3 would not fire up...
Now i have SLI undone and using gpu 1 with my monitor, and gpu 2 with my tv and gpu just sitting there looking pretty as I have no dummy plugs

Re:OK, I am back up and running!!! (Horvat)

Fri, 06 Nov 2009 16:54:46 GMT

barnhartmd051977

Well, I got my CM V8 repaired, and its working... I also got the three GTX 260 SSC's installed... I can only fold on two of them as of right now... I thought the new drivers allowed you to fold without dummy plugs, WRONG!!! 191.07 u need dummy plugs!!! I am folding GPU 1 wint my Samsung Monitor, and Folding on GPU 2 using my Sony 40 TV, and GPU 3 has nothing... So I am at least running 2 of 3 GPUs, and 8 cores on my i7, no -bigadv for me yet I will wait for u guys to get all the bugs worked out...

I would also like to thank tank 1023, wb488641, Horvat, and everyone else that helped me get through this!!!

Did you have SLI enabled without the dummy plugs? With the 191.07 driver I have been able to run my two 9800 GX2's and three GTX 285's without dummy plugs WITH SLI enabled. If you have SLI disabled, you need dummy plugs. Just a note though, at least with my systems, there is a small loss of PPD when I fold with no dummy plugs and SLI enabled. More PPD with dummy plugs and SLI disabled.

Re:OK, I am back up and running!!! (leftygof)

Fri, 06 Nov 2009 16:13:52 GMT

Bugs?....We don't have no stinkin' Bugs!

OK, I am back up and running!!! (barnhartmd051977)

Fri, 06 Nov 2009 16:10:32 GMT

Well, I got my CM V8 repaired, and its working... I also got the three GTX 260 SSC's installed... I can only fold on two of them as of right now... I thought the new drivers allowed you to fold without dummy plugs, WRONG!!! 191.07 u need dummy plugs!!! I am folding GPU 1 wint my Samsung Monitor, and Folding on GPU 2 using my Sony 40 TV, and GPU 3 has nothing... So I am at least running 2 of 3 GPUs, and 8 cores on my i7, no -bigadv for me yet I will wait for u guys to get all the bugs worked out...

I would also like to thank tank 1023, wb488641, Horvat, and everyone else that helped me get through this!!!