EVGA X58 Micro (E756) - BIOS 44 Released

Re:EVGA X58 Micro (E756) - BIOS 44 Released (moncho)

Mon, 08 Mar 2010 14:42:13 GMT

Just wanted to let everyone know that this BIOS appears to have corrected an issue I had with multiple RAID 0 configurations I have. The OS would hang on bootup now all is well.

Cheers...

Re:EVGA X58 Micro (E756) - BIOS 44 Released (nysully100)

Sun, 21 Feb 2010 13:37:44 GMT

My system is running smooth...

Anything necessary with this update?

Re:EVGA X58 Micro (E756) - BIOS 44 Released (cauchy2k)

Sun, 21 Feb 2010 00:52:55 GMT

The only bad thing that happened to me is that now my memory runs 1066@8-8-8-20 and before it was 1066@8-8-8-19,also I noticed that POST time got reduced,which is good and maybe is due to a bit higher memory timings,overall is a good bios update.

Re:EVGA X58 Micro (E756) - BIOS 44 Released (pstlouis)

Sun, 07 Feb 2010 15:16:06 GMT

What functions turbo mode performance boost do ? I already overclock my system and when I enable turbo performance nothing change ?

Re:EVGA X58 Micro (E756) - BIOS 44 Released (ninken)

Sat, 06 Feb 2010 20:54:40 GMT

I had a problem with this BIOS release. I use USB keyboards, I tried two different USB keyboards in the BIOS it refused to use the (+/-) key's for me to change my HD Boot order, I found a old PS2 Keyboard and the (+/-) key's worked.

Re:EVGA X58 Micro (E756) - BIOS 44 Released (Zsoltom)

Sat, 06 Feb 2010 07:09:57 GMT

What is the Turbo Performance?
Thx.

Re:EVGA X58 Micro (E756) - BIOS 44 Released (No_Limit)

Fri, 05 Feb 2010 11:36:26 GMT

I needed small adjustments (memory, CPU Voltage) to make everything runs stable with "performance mode" but I am very happy, no problems for 2 hours, Games, Vantage, ok

EVGA X58 Micro (E756) - BIOS 44 Released (EVGA_JacobF)

Thu, 04 Feb 2010 17:13:09 GMT

This BIOS is ONLY for the EVGA X58 Micro Motherboard (part number 121-BL-E756-)

BIOS 44 Updates:

Supports 32nm Desktop CPUs
Added "Turbo Performance" option (may boost performance if enabled)
Fixes 1866MHz Memory Ratio

BIOS updating can be accomplished VIA the below methods:

CD/DVD Installation - Recommended installation method

Download the following .iso file: E756_44.iso
Use a CD Burning software to burn the .iso image onto a blank CD (Nero, Alochol 120%, MagicISO etc.)
After it has burned, insert CD and restart the machine, go into the BIOS and load defaults, save and exit
Now set the CD Drive as the primary boot device, or press escape while the system is booting to select CD as the bootable device.
After flash remove the CD, and power off PC Completely.
Turn on the PC and load defaults in BIOS

USB FLOPPY Installation - Recommended installation method

Download the following executable: E756_44.exe
Insert blank floppy disk into drive and run executable
After the floppy has written fully, restart the machine, go into the BIOS and load defaults, save and exit
Now set the USB Floppy as the primary boot device, or press escape while the system is booting to select USB Floppy as the bootable device
After flash remove the floppy, power off PC Completely
Turn on the PC and load defaults in BIOS

USB Flash Drive Installation - Alternate installation method

Download: E75644.bin
Visit this thread and follow the installation instructions. (thanks 30h6).

Warning:
**Do not restart or interrupt your PC while the flash is ongoing
**Do not Flash BIOS on overclocked settings
**It is always recommended to power-down after flash and Clear CMOS