9800gtx+ and gts250 sli

Re:9800gtx+ and gts250 sli (glynyrd)

Wed, 11 Nov 2009 15:16:07 GMT

Thanks for info...I'll check it out.

Re:9800gtx+ and gts250 sli (mdedrick)

Sat, 07 Nov 2009 22:15:37 GMT

in the 9 series forum, they have a, what card do you run forum. halfway down the page, one guy has a gts250 sli'd with a 9800gtx

http://www.evga.com/forums/tm.aspx?m=694

maybe you can PM him and see what he did. ill ask him in the thread.

Re:9800gtx+ and gts250 sli (heymike_s)

Sat, 07 Nov 2009 20:39:34 GMT

My 2 280's running in SLI:

Re:9800gtx+ and gts250 sli (heymike_s)

Sat, 07 Nov 2009 20:32:45 GMT

Is the mem. and gpu speed a G92 thing?? I use a couple of GTX280's with different clocks with no problems.
Besides, can't you just DL precision and clock both cards to the same numbers?

@Shock
The 9800GTX+ and the GTS250 are the same GPU.
And viewed with precision my clock speeds do not change unless I click the sync button.

Re:9800gtx+ and gts250 sli (glynyrd)

Sat, 07 Nov 2009 16:38:21 GMT

I just read sticky and you CAN sli 9800GTX+ and GTS250 but gpu and memory speeds must be same. Both based on same gpu.

Re:9800gtx+ and gts250 sli (ShockTheMonky)

Sat, 07 Nov 2009 16:36:02 GMT

Memory speed is not the issue. You can't SLI 2 different GPU based cards. If you have 2 like gpu cards with different clocks then what ever card you have as the primary then those will be the clocks used when in sli mode.

9800gtx+ and gts250 sli (glynyrd)

Sat, 07 Nov 2009 16:29:15 GMT

Why did they have to make memory speed an issue with sli'ing 250/9800GTX+
My 9800GTX+ 756 gpu, 1836 shader and 2246 memory only difference is memory speed, lousy 46mhz. The only other 9800GTX+ I can get is clocked lower all-around 675 gpu, 1792 shader and 2200 memory. The GTS250 I was looking at 756 gpu, 1836 shader and 2200 memory. Lousy 46MHz.

I sli'd 2 7900GS's with diiferent manufacturer, gpu and memory clock. I thought as long as same gpu clock speeds didn't matter with the newer drivers.

Is there any way I can flash video card bios or edit it to get my memory clock to 2200 from 2246?
I want to sli these cards and 46 mhz just seems like minor issue to me.

It's a completely different system than what my signature states. I still have that system but I have another AM2+ quad system as well.