http://www.evga.com/forums/(c) EVGA Forums30I just got my H50 in the other day along with my DDR3-2000 Ripjaws and today I started tinkering with a Core i5 750 4Ghz overlock. I set up the H50 with two powerful 93CFM fans pulling cool air from the ouside in (Yes they are LOUD!). These are the settihttp://www.evga.com/forums/fb.ashx?m=244732Thu, 18 Mar 2010 22:32:32 GMTActually, even if i contact Evga... i just don't know how to RMA the motherboard. My vendor said that he won't RMA unless defective (he actually has a point).http://www.evga.com/forums/fb.ashx?m=244713Thu, 18 Mar 2010 22:19:51 GMTWow that looks really inconsistent. Definitely contact Evga about this. Makes me want to pull my Cpu and check it too.http://www.evga.com/forums/fb.ashx?m=244613Thu, 18 Mar 2010 21:12:58 GMTOn my cpu the P55 FTW marked 100% of the pads. I would be concerned. See what EVGA has to say.http://www.evga.com/forums/fb.ashx?m=244538Thu, 18 Mar 2010 20:31:05 GMTI use the one at bottom left of CPU,and also I think the one far right of board at bottom is controllable from bios..you will love that cooler:)http://www.evga.com/forums/fb.ashx?m=244508Thu, 18 Mar 2010 20:12:36 GMTUP~http://www.evga.com/forums/fb.ashx?m=244373Thu, 18 Mar 2010 19:03:02 GMTThanks. Do you mind which ones you use? There is the one in the center of the mainboard and one for the CPU. Where is the second fan plugged into?http://www.evga.com/forums/fb.ashx?m=244303Thu, 18 Mar 2010 18:38:05 GMT(Please Forgive my english, im from Latin America) I brought, a few weeks ago, a Evga P55 Ftw. There was no problem or what so ever in removing the cpu cover, installing the cpu (i5 750), or even installing windows. (I also managed 4.0 rock solid)http://www.evga.com/forums/fb.ashx?m=244205Thu, 18 Mar 2010 17:55:30 GMTGoodnight everyone, I wonder if you have to update the raid driver for windows? When I mounted the raid 0, did not do any kind of update, now the driver seems to be old, 2006 of microsoft. I wonder if it is to update the controller driver raid without fohttp://www.evga.com/forums/fb.ashx?m=244165Thu, 18 Mar 2010 17:40:21 GMT i have my RAMs(Patriot Viper 1600 7 7 7 20 1,65v) set to 1066MHz @1600MHz with 9 9 9 24 - rest auto, doesnt work but ill keep trying diferent setting 10x for help anyway :) increased vtt to 1,4 as a result top tehttp://www.evga.com/forums/fb.ashx?m=244022Thu, 18 Mar 2010 16:30:01 GMTi have my RAMs(Patriot Viper 1600 7 7 7 20 1,65v) set to 1066MHz @1600MHz with 9 9 9 24 - rest auto, doesnt work but ill keep trying diferent setting 10x for help anyway :) increased vtt to 1,4 as a result top temperature droped by 3chttp://www.evga.com/forums/fb.ashx?m=243872Thu, 18 Mar 2010 15:07:32 GMT EVGA P55 Micro Go into bios and set all of the advanced memory timings manually. Anything normally set on Auto you must set manually. VTT increase may also help. The fewer settings you have onhttp://www.evga.com/forums/fb.ashx?m=243832Thu, 18 Mar 2010 14:49:38 GMTEVGA P55 Microhttp://www.evga.com/forums/fb.ashx?m=243792Thu, 18 Mar 2010 14:30:06 GMT Your sig fails to list memory! Oh my bad, I have the G.SKILL Ripjaws Series 4GB (2 x 2GB)http://www.evga.com/forums/fb.ashx?m=243768Thu, 18 Mar 2010 14:15:42 GMT Your sig fails to list memory! Oh my bad, I have the G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 2000 (PC3http://www.evga.com/forums/fb.ashx?m=243713Thu, 18 Mar 2010 13:56:03 GMTThanks for the reply. Also, the memory sticks as shown were tested by eVGA to work, but you all know how things actually work in the real world. Reason for these memory sticks over others, is I have an opehttp://www.evga.com/forums/fb.ashx?m=243672Thu, 18 Mar 2010 13:37:15 GMTI am not 100% positive about that specific line of Corsair memory but if it helps any I was using up until recently the Corsair XMS3 DHX on my P55FTW without any problems at all. I now switched over to the G.Skill Ripjaws DDR3-2000 and am extremely satishttp://www.evga.com/forums/fb.ashx?m=243659Thu, 18 Mar 2010 13:33:34 GMTi currently have my i5 750 w/ corsair H50 at 4.0Ghz and my max temps on Intel Burn Test 20 passes at maximum stress test was 75C mainly hovering around 72-73C under load. I expected the higher temps due to my case (Thermaltake LANbox) but its 100%http://www.evga.com/forums/fb.ashx?m=243653Thu, 18 Mar 2010 13:31:43 GMT I am switching to the Corsair H50 system and away from the shoddy retension 1156 bracket of the Cooler Master V8. Has anyone installed this on to the P55 FTW? Did you find that their was enough fan slots for a Push/Pullhttp://www.evga.com/forums/fb.ashx?m=243568Thu, 18 Mar 2010 12:51:43 GMTUnderstand some have had issues getting Corsairs 8GB to work filling up four slots...... Does anyone have this Corsair Dominator-GT memory shown below (1600 Mhz) in an 8 GB [/http://www.evga.com/forums/fb.ashx?m=243539Thu, 18 Mar 2010 12:37:16 GMTI am switching to the Corsair H50 system and away from the shoddy retension 1156 bracket of the Cooler Master V8. Has anyone installed this on to the P55 FTW? Did you find that their was enough fan slots for a Push/Pull configuration?http://www.evga.com/forums/fb.ashx?m=243510Thu, 18 Mar 2010 12:22:42 GMT I have 74c running i5 750 20x205 4,1GHz in Linx I use 1,4vcore and 1,35 vtt Cooling is Mugen2, case NZXT Tempest The only wired thing is that after whole night rest my pc cant start up. i have to reset bios, load samehttp://www.evga.com/forums/fb.ashx?m=243454Thu, 18 Mar 2010 11:59:51 GMTI have 74c running i5 750 20x205 4,1GHz in Linx I use 1,4vcore and 1,35 vtt Cooling is Mugen2, case NZXT Tempest The only wired thing is that after whole night rest my pc cant start up. i have to reset bios, load same settings and than it goeshttp://www.evga.com/forums/fb.ashx?m=243354Thu, 18 Mar 2010 11:10:14 GMTI used to play with X58 4way sli and 2x HIS 5970 and didnt have any trouble. Everything worked fine, and the CF bridge comes with gpuhttp://www.evga.com/forums/fb.ashx?m=243330Thu, 18 Mar 2010 10:56:53 GMT"I feel that this is probably the best P55 based board I can buy," - not sure I can agree with that. Some impressive competition from MSI and Asus now.http://www.evga.com/forums/fb.ashx?m=243001Thu, 18 Mar 2010 08:16:27 GMTConcerning the dual 8-pin power connectors I have two P55 FTW set ups with identical components 1) (Formerly) main rig, i7 860 Batch ID 3924B276, 2 kits F3-12800CL9D-4GBRL, Corsair HX620W PSU with one 8-pin CPU and 1 4-pin CPU power cable, Bios A51http://www.evga.com/forums/fb.ashx?m=242980Thu, 18 Mar 2010 08:05:50 GMTFor what it's worth, I finished building a i5 750 with an H50 and ran into high temps at stock settings. After revisiting my installation, a few things made a huge difference and utilizes 100% of the H50 capabilities. Tightehttp://www.evga.com/forums/fb.ashx?m=242937Thu, 18 Mar 2010 07:39:22 GMTI've had my Lian Li 5.25 card reader connected to the mobo USB headers disappear every few days and needing to be plugged out and back in again in order to work until the next time it does the same trick. Tried all of the USB headers - same result.http://www.evga.com/forums/fb.ashx?m=242867Thu, 18 Mar 2010 06:40:27 GMT ok, guys and girls ! this is my hardware for my P55 FTW motherboard; i7 860 **no water cooling, ON AIR**DDr3 Corsair Dominator w/FAN @ 8 gigs (2 Gigs x 4) 8-8-8-24 2http://www.evga.com/forums/fb.ashx?m=242851Thu, 18 Mar 2010 06:26:25 GMT Crossfire will work fine on the board, just make sure your bios is up to date. Crossfire support is listed and can be used on EVGA boards. How do i know? I have done it. It worked fine. Yes but I think the issue hhttp://www.evga.com/forums/fb.ashx?m=242832Thu, 18 Mar 2010 06:09:53 GMTCrossfire will work fine on the board, just make sure your bios is up to date. Crossfire support is listed and can be used on EVGA boards. How do i know? I have done it. It worked fine.http://www.evga.com/forums/fb.ashx?m=242826Thu, 18 Mar 2010 06:02:58 GMTare you actually having problems? if youre running 4ghz with no problems, then dont worry. to try to step up to 4.2 is a mjor pain in the ass for some people, and you definately cannot use the AUTO setting in ANY of the overclocked components.http://www.evga.com/forums/fb.ashx?m=242818Thu, 18 Mar 2010 05:50:57 GMTwell, until one of my cards died, i had two 3870x2 in xfire on my p55 ftw e657, and it ran flawlessly. freaked my mom out when i turned on my computer, and the lights in my room dimmed!LOL!http://www.evga.com/forums/fb.ashx?m=242815Thu, 18 Mar 2010 05:48:02 GMT The plain and simple truth. BUT That's alright, ANY ATI partner (including ECS) makes better Graphics Cards than EVGA 7 days a week anyways. It just means that EVGA isn't up to snuhttp://www.evga.com/forums/fb.ashx?m=242811Thu, 18 Mar 2010 05:44:25 GMTI have 3 x USB hard disks and have not lost any info by just switching them off or unplugging. Of course I suspect this may be due to the fact that I wait until data has finished copying first. A USB hard disk controller is designed to allow dhttp://www.evga.com/forums/fb.ashx?m=242667Thu, 18 Mar 2010 02:34:53 GMT Dipstick JR... can you please get close to the cables... I need to see how exactly they are in there... like which color on the cable faces what side. Much appreciated I ask again... Have you actually triedhttp://www.evga.com/forums/fb.ashx?m=242665Thu, 18 Mar 2010 02:31:33 GMT hm,.... I am clocked at 4.00 gigs with 8 gigs 8-8-8-24 @ 1600 Mhz DDr3, no problem here with new bios A59. Never had a problem with rebooting or anytype of POST error, .... no problem here... Tested with Prime95, system ihttp://www.evga.com/forums/fb.ashx?m=242664Thu, 18 Mar 2010 02:29:10 GMTThanks Nycubano for the answer but I wonder to know why my system was perfect before the A59 Bios and Why It works with values PCH/CPU VTT set and FAILS with Auto values in BIOS ? Now I have to turn manually ON my graphic card fan because of temhttp://www.evga.com/forums/fb.ashx?m=242659Thu, 18 Mar 2010 02:03:17 GMThm,.... I am clocked at 4.00 gigs with 8 gigs 8-8-8-24 @ 1600 Mhz DDr3, no problem here with new bios A59. Never had a problem with rebooting or anytype of POST error, .... no problem here... Tested with Prime95, system is stablehttp://www.evga.com/forums/fb.ashx?m=242658Thu, 18 Mar 2010 01:49:44 GMToo concerned about a random user on the EVGA forums providing this information to you. Can you confirm that that information was provided by an actual EVGA representati AMD just sent the following: "Dear&nbshttp://www.evga.com/forums/fb.ashx?m=242488Wed, 17 Mar 2010 22:21:53 GMT take a screwdriver and short out two pins together and whichever two turn it on that is where your power switch goes and just do the same for the others. lol But anyways each case should hhttp://www.evga.com/forums/fb.ashx?m=242449Wed, 17 Mar 2010 21:58:06 GMTtake a screwdriver and short out two pins together and whichever two turn it on that is where your power switch goes and just do the same for the others.http://www.evga.com/forums/fb.ashx?m=242435Wed, 17 Mar 2010 21:47:54 GMT Hello ! I've the same issue : no way to get the WOL work. I parameterd the ACPI on S3, tried to enable everything that could be related to the WOL, with no success. Whttp://www.evga.com/forums/fb.ashx?m=242394Wed, 17 Mar 2010 21:25:52 GMTTake the FTW back. Buy a Gigabyte.http://www.evga.com/forums/fb.ashx?m=242194Wed, 17 Mar 2010 19:44:37 GMT The plain and simple truth. BUT That's alright, ANY ATI partner (including ECS) makes better Graphics Cards than EVGA 7 days a week anyways. It just means that EVGA isn't up to snuff with the good stuff. Jushttp://www.evga.com/forums/fb.ashx?m=242189Wed, 17 Mar 2010 19:43:05 GMTok, guys and girls ! this is my hardware for my P55 FTW motherboard; i7 860 **no water cooling, ON AIR**DDr3 Corsair Dominator w/FAN @ 8 gigs (2 Gigs x 4) 8-8-8-24 2T 1.65v[*http://www.evga.com/forums/fb.ashx?m=242156Wed, 17 Mar 2010 19:27:51 GMT The plain and simple truth. BUT That's alright, ANY ATI partner (including ECS) makes better Graphics Cards than EVGA 7 days a week anyways. It just means that EVGA isn't up to snuff with the good stuff. Just rehashed/renahttp://www.evga.com/forums/fb.ashx?m=242152Wed, 17 Mar 2010 19:24:21 GMToh thats not bad at all, i had a similar issue with a video card.. http://www.evga.com/forums/fb.ashx?m=242050Wed, 17 Mar 2010 18:19:34 GMT That AMD person is weird. My understanding is that the P55 architecture is designed to have built-in support for both SLI and Crossfire. This would mean that EVGA would have to go out of their way to remove Crossfire support from thhttp://www.evga.com/forums/fb.ashx?m=242026Wed, 17 Mar 2010 18:05:09 GMTAnyone who says a 5970 is not compatible with an EVGA FTW is out of his or her mind... My girlfriends brother just went from an MSI P55 to EVGA FTW and he has a 5970 XFX and he had no problems on either board.. I have been contemplating sellihttp://www.evga.com/forums/fb.ashx?m=241994Wed, 17 Mar 2010 17:48:56 GMT