http://www.evga.com/forums/(c) EVGA Forums30No problems here eitherhttp://www.evga.com/forums/fb.ashx?m=242719Thu, 18 Mar 2010 04:05:03 GMT Read known limitations section from the readme! Got it, thanks...http://www.evga.com/forums/fb.ashx?m=242639Thu, 18 Mar 2010 01:12:03 GMTRead known limitations section from the readme!http://www.evga.com/forums/fb.ashx?m=242590Wed, 17 Mar 2010 23:54:28 GMTAnyone know why precision wont display on screen any information in the new game? I can shut the game down and look at the graph, and all the history is there, it just wont display any info while in the game. Its not a 64 bit game eithhttp://www.evga.com/forums/fb.ashx?m=242555Wed, 17 Mar 2010 22:58:49 GMTThanks! I am going to stay with RivaTuner. I have been using low level fan control since day one...back with my 8800 GTS...still working with my GTX260 and Nvidia 197.13. As long as I remember to force driver version...never anyhttp://www.evga.com/forums/fb.ashx?m=242393Wed, 17 Mar 2010 21:25:51 GMTYeah, works fine for me.http://www.evga.com/forums/fb.ashx?m=241628Wed, 17 Mar 2010 14:16:02 GMTAnyone tested 1.9.1 with the new NV driver set 197.13 just released to fix the overheating fan issues??http://www.evga.com/forums/fb.ashx?m=241401Wed, 17 Mar 2010 11:55:28 GMTWorked for me with DX10+AA, think it simply works for some and not for others.http://www.evga.com/forums/fb.ashx?m=240947Wed, 17 Mar 2010 07:13:07 GMT I'm pretty sure Precision only uses driver level control. You may also want to have a look at another program, MSI Afterburner. (again, driver level only) Correct. Both Precision and Afterburnhttp://www.evga.com/forums/fb.ashx?m=240771Wed, 17 Mar 2010 04:43:52 GMTRivatuner\Precision\Afterburner are all basically the same thing, just different GUI's. Afterburner (which does work with Nvidia GPU's) allows you to set custom fan profiles. E.g. if your GPU temps goes above xx set fan to xx, and so forth. I mighthttp://www.evga.com/forums/fb.ashx?m=239915Tue, 16 Mar 2010 18:37:40 GMTI was going to install the newest version, but was liking 1.90. Strange though, it just wigged out, for no apparent reason.http://www.evga.com/forums/fb.ashx?m=239912Tue, 16 Mar 2010 18:36:11 GMTI'm pretty sure Precision only uses driver level control. You may also want to have a look at another program, MSI Afterburner. (again, driver level only)http://www.evga.com/forums/fb.ashx?m=238918Tue, 16 Mar 2010 08:54:22 GMTI have used RivaTuner for the last few years and wouldn't work without it. Question about Precision...is there a way to do low level fan control as in RivaTuner???? I do a lot of video encoding, etc...and believe it or not, when CUDA is involhttp://www.evga.com/forums/fb.ashx?m=238831Tue, 16 Mar 2010 07:47:00 GMTIf you're running the game in DX10 mode with AA enabled, then peek into readme / known limitations.http://www.evga.com/forums/fb.ashx?m=238637Tue, 16 Mar 2010 04:19:20 GMTIs it just this game? http://www.evga.com/forums/fb.ashx?m=237437Mon, 15 Mar 2010 15:17:00 GMTSweet, ill give it a shot in Afterburner later. I imagine I have to download a new version tho lol.http://www.evga.com/forums/fb.ashx?m=237120Mon, 15 Mar 2010 12:46:06 GMTawesome!!! Thanks Unwinder!http://www.evga.com/forums/fb.ashx?m=237001Mon, 15 Mar 2010 11:49:10 GMTi load precision and i cant see fps on my screen, any ideas?http://www.evga.com/forums/fb.ashx?m=236659Mon, 15 Mar 2010 08:42:12 GMTI have two profiles of different fan speeds, and my hotkeys (though set) do not seem to affect the profiles any longer. Not sure if this happened with 1.9.1 upgrade or not (checking of others are having a similar issue)? I've tried changing the hotkeys whttp://www.evga.com/forums/fb.ashx?m=236641Mon, 15 Mar 2010 08:34:14 GMTDetails and download link are available in this thread: http://forums.guru3d.com/showthread.php?t=317513 http://www.evga.com/forums/fb.ashx?m=236360Mon, 15 Mar 2010 04:08:45 GMTVery strange, I have the same problem! Even before I got the message "Some of Evga ....", I cannot set GPU fan munually to say 100%. The fan speed would change to 100% but only stay there for fraction of second and back to 40%. After I reinstall grhttp://www.evga.com/forums/fb.ashx?m=235166Sun, 14 Mar 2010 13:07:58 GMTJust install the newer onehttp://www.evga.com/forums/fb.ashx?m=234789Sun, 14 Mar 2010 09:00:43 GMTI have been running v. 1.90 for a while, with only the occasional "evga precision 1.9.1 is now available, do you want to update now?" showing. Today when i started my comp, i got an error message. " Some of evga precision files are missing or cohttp://www.evga.com/forums/fb.ashx?m=234624Sun, 14 Mar 2010 06:31:13 GMTDid you install that POS of a game Dark Void ?http://www.evga.com/forums/fb.ashx?m=233931Sat, 13 Mar 2010 17:51:50 GMTsorry, wrong forums. Ill repost elsewhere. Lock this please.http://www.evga.com/forums/fb.ashx?m=233576Sat, 13 Mar 2010 14:01:51 GMTTitle says it all. Physx will not work. I've got the most up to date video driver. Nothing that runs Physx will run. DA:O tells me "Unable to initialized PhysX." Then to go to nvidia.com/physx to get the most up to date driver. I've uninstalledhttp://www.evga.com/forums/fb.ashx?m=233574Sat, 13 Mar 2010 13:59:57 GMTI haven't used precision tool in a while and now can't seem to figure out how to speed up the fan shall my card's temp go over set number. I'm running the latest drivers and tool. It used to be pretty straight forward if I remember correctly I can mahttp://www.evga.com/forums/fb.ashx?m=233560Sat, 13 Mar 2010 13:50:40 GMTVerify the speed by multiple APP's, i.e. GPU-Z, Everest etc.http://www.evga.com/forums/fb.ashx?m=233094Sat, 13 Mar 2010 09:55:40 GMTThen I would prefer some settings of anybody with a GTX260. Thanks, though. Anybody knows about my question about the 216 core and the "GT200 GPU" precision says I have?http://www.evga.com/forums/fb.ashx?m=233028Sat, 13 Mar 2010 09:16:03 GMTMines actually a GTX240 right now 650 core 1583 shader 4300mhz mem for just messing around. stock its 550 core 1340 shader 3588 mem either I got a good card or EVGA makes 240's as good as 260'shttp://www.evga.com/forums/fb.ashx?m=232889Sat, 13 Mar 2010 07:59:39 GMTThank you all But Max Killz, what are you exact core, shader and memory OC settings your GTX260 is stable? Sounds like good start settings to test. Finally, a question not about precision software itself but, precision says I have a "Geforce GThttp://www.evga.com/forums/fb.ashx?m=232881Sat, 13 Mar 2010 07:52:05 GMT That worked! I put core clock on 660 and the readings were right. The "funny" thing is I've raised it to 700 and the screen began to flash and I've had to reboot the hard way (pressing and maintaining the power button for a hardhttp://www.evga.com/forums/fb.ashx?m=232864Sat, 13 Mar 2010 07:43:07 GMThmm maybe, I can get it up over 2200 and it be stable so 4400 mhz by that logic? if thats true then awesome XDhttp://www.evga.com/forums/fb.ashx?m=232854Sat, 13 Mar 2010 07:32:34 GMThighest I have ever pushed it was 680, worked for about 30 seconds before it started to glitch out. but I'm already going 110mhz over factory so I guess I got a pretty good cardhttp://www.evga.com/forums/fb.ashx?m=232851Sat, 13 Mar 2010 07:30:43 GMThttp://www.legitreviews.com/article/1144/1/ OK as I said before GDDR5 is Real MHZ x4 instead of x2 as in GDDR2/3 Now I do not have a card with GDDR5 to see if App's shttp://www.evga.com/forums/fb.ashx?m=232798Sat, 13 Mar 2010 06:21:47 GMTThat worked! I put core clock on 660 and the readings were right. The "funny" thing is I've raised it to 700 and the screen began to flash and I've had to reboot the hard way (pressing and maintaining the power button for a hard power off) but on 760 corhttp://www.evga.com/forums/fb.ashx?m=232786Sat, 13 Mar 2010 06:13:17 GMTThe card I'm currently testing is the 240 superclocked specs are 550 core 1340 shader 3588 memhttp://www.evga.com/forums/fb.ashx?m=232772Sat, 13 Mar 2010 05:55:06 GMTBut I can play any game with those settings set. I don't know what "2D mode" means but it sounds like you can't play any game with 3D rendering like Battlefield. I try now to reset to default and reboot and I give you the readingshttp://www.evga.com/forums/fb.ashx?m=232771Sat, 13 Mar 2010 05:53:42 GMTI done here because you ain't eve told us your GPU which is the 1st thing you should have and is basic common sense. I have no way to check that cards model to see what your doing wrong if anything.http://www.evga.com/forums/fb.ashx?m=232770Sat, 13 Mar 2010 05:52:30 GMTUAC stopping you editing the .INI file ? Take Ownership or simply disable UAC to let you edit then then enable it again.http://www.evga.com/forums/fb.ashx?m=232769Sat, 13 Mar 2010 05:50:37 GMTyou could have set it too high and crashed the driver and it set to 2-d mode. when that happens on mine it goes to 405mhz core and I can't change it no matter what I do until a reboot. I usually have mine set at about 660mhz any higher and it reverts tohttp://www.evga.com/forums/fb.ashx?m=232759Sat, 13 Mar 2010 05:38:11 GMTI didn't try those programs yet. I've forgotten to say that I tried to manually changing the fan speed to test if precision was working at all and it changes the fan speed indeed, I can hear the fan speed change.http://www.evga.com/forums/fb.ashx?m=232756Sat, 13 Mar 2010 05:32:45 GMTHave you tried a different program than Precision to monitor the speeds of the card? Riva, GPUz are also good to start.http://www.evga.com/forums/fb.ashx?m=232751Sat, 13 Mar 2010 05:23:48 GMTHi all I have a (reported by EVGA Precision 1.9.1) "Geforce GTX 260 on GT200 GPU" (is this the reading of a GTX260 with 216 core or my card is worse?) with 196.21 ForceWare drivers. My card is not of EVGA, though. My default values are 518/1080http://www.evga.com/forums/fb.ashx?m=232741Sat, 13 Mar 2010 05:12:01 GMTwhen I first bring it up it shows 550mhz core 1340mhz shader 1800mhz mem max I can do before a crash is 663mhz core 1612 shader 2300 mem.http://www.evga.com/forums/fb.ashx?m=232666Sat, 13 Mar 2010 02:49:11 GMTwhen i try to use the tweak i get a error saying ACCESS DENIED im using windows 7 ulimate 64.http://www.evga.com/forums/fb.ashx?m=232645Sat, 13 Mar 2010 02:01:34 GMTUse the tweak to UNHIDE the hidden settings ! Set 1 profile for 2D (speed+fan speed), it will go even lower once the power saving kicks in. Set another profile for games (speeds+fan speed). They will change as the chttp://www.evga.com/forums/fb.ashx?m=231610Fri, 12 Mar 2010 13:58:51 GMTApply the overclock. Once your done. Right click on profiles to save themhttp://www.evga.com/forums/fb.ashx?m=231258Fri, 12 Mar 2010 11:18:11 GMTI don't know of a way to make fan profiles in Precision but you can try RivaTunerhttp://www.evga.com/forums/fb.ashx?m=231163Fri, 12 Mar 2010 10:16:31 GMThell could some please tell me how to make fan profiles for crysis and crysis warhead im adjusting the fan speed my self and i dont want to keep doing it. so a profile for both games would be great thanks alot....http://www.evga.com/forums/fb.ashx?m=230832Fri, 12 Mar 2010 06:03:56 GMT