Then we get to start a whole new thread! 

nateman_doo




Then we get to start a whole new thread! 

But this one has made it so far. I think you should just keep it going and change the title.

New waterblock - New thread. This will keep going as long as the SR-2 is around. I can make this block forever. Copper wont change so i can make these for as long as people still use the board.

Keep up the good work man. The more people who can make custom WBs for boards/cards/chips the better!

Still no word on these SRX's?

jacob posted somewhere 1st or 2nd week april

Gratuitous

jacob posted somewhere 1st or 2nd week april

 
here...
http://www.evga.com/forums/fb.ashx?m=1503173

nice.  So we have some time.

"pretend there's a photo of an evga sr-x with full copper water-blocks on it"
(cant post until 5 days)
 
Hint Hint...

Welcome to the forums! 
 
I will make it happen, as soon as I can get my hands on a board.

nateman
 
When the SR-x comes around and you start working on a block this time I will get one as long as I don't have to wait long ;)

Id be more then happy to help you.  I can't say how long it will take but I have made quantum leaps in designing and coding, but it sill comes down to my slow mill.  I can't rush that sort of thing.  You don't want me to rush your work do you?  :)
 
 

 
doubtful but if u do not have an srx when i begin collecting for the 2nd half of my build ill send mine your way.

Sweet.  I look forward to it.

It's been said many times already, but it will be said again.  Wow, just wow nateman. This thread is the epitome of SR-2 porn. What an amazing thread, and product and it shows in the pictures, dedication and responses of fellow members who own and lust to own them.  Being as I just got my new SR-2 system stable with some closed loop systems (*cough* Corsairs *cough), I really, really regret looking at this entire thread for the fact it inspires me to be the new Ferrari driver who most likely has a ton of fun and keeps in control 95% of the time then spins out into a tree :) Proverbially epic. I'm very highly considering ordering a whole set of these for my SR-2 board just for doing a truly correct water cooled build in the future, because that's what these type of boards deserve (and because I'd really like to crank up my system down the road since we true techies are so incredibly insatiable).
 
Massive big props to your projects and your continued success...

Thanks!  Welcome to the forum!  Now keep your hands on the wheel, we don't want anyone wiping out on the roads in any cars, especially Ferrari's    ;)
 
I will be here when you need me. 

oops..

SRX is in stock in the EU now, I shoudl be getting my hands on one next week if all goes well. Let me know if I can help you with anything related to it.

Do you have some digital calipers?

i do nate! :D

Do you have an SRX also?  :)

about halfway to purchasing one , yes

As soon as you have one, then thats all that is needed to begin the design phase for a waterblock.

i do not own a CNC mill or am as epic as you :P ( except maybe with painting and putting in a new floor in a house which i am currently doing)
 
i will leave the water block building to the master and purchase one from you. :)
 
now, about those calipers ......... :P

Thats pretty epic also.  Still, an SRX, and some calipers need to occupy the same place at the same time

yes, what i was refering to is if u need some calipers , i have some , might even have extras i could send your way

How expensively good do they need to be?
 
I was on my way to an SR-X but they went out of stock but hopefully soon!

Sleinous


How expensively good do they need to be?

I was on my way to an SR-X but they went out of stock but hopefully soon!

calipers for this kind of measurments should be acurate to +/- .002 that should be good enough. there is a little skill involved in using them acuratly though as well (although if you are detailed enough to build computers then more than likely you have enough skill)
 
this would be fine although better quality would be better.
 http://www.harborfreight.com/6-inch-digital-caliper-47257.html
 
and always remeasure the same dimention several times to make sure you didnt have a grain of dust or somthing messing you up:)

measure twice , cut once :)

Gratuitous

Sleinous


How expensively good do they need to be?

I was on my way to an SR-X but they went out of stock but hopefully soon!

calipers for this kind of measurments should be acurate to +/- .002 that should be good enough. there is a little skill involved in using them acuratly though as well (although if you are detailed enough to build computers then more than likely you have enough skill)

this would be fine although better quality would be better.
http://www.harborfreight.com/6-inch-digital-caliper-47257.html

and always remeasure the same dimention several times to make sure you didnt have a grain of dust or somthing messing you up:)

 
Yep, that's affordable, woul djust have to find something like that in France. Would also need to know exactly what i'm measuring ;)